I have tried many of the methods stated here about how to fix my wifes steam generator. Cleaned the pipes to and from the boiler, ran thru vinegar solution, changed the thermal switches under the boiler and even took the boiler apart to clean any scale. I do not advise taking apart the boiler tho as 7 of the eight bolts sheared off and had to be drilled out (such is the problem with threading steel into aluminium). my symptoms were as follows:- Limescale build-up produces lime deposits that cause yellow stain of the clothes when ironing. These yellow streaks are visible and particularly stain white fabrics. Repeated use for an extended period, the soleplate of the steam iron accumulates dirt that may stain the fabric during ironing. The dirt may also snag the fabric, damage it and make the iron unable to glide smoothly on the materials. Regular cleaning of the soleplate is a must to prevent dirt accumulation. Further to this, jolts can also cause water droplets to drop out of the soleplate, so no hard and sharp movements.

They both have durable soleplates that give you the best ironing experience. They have Tri-Zone technology that effectively unwrinkles different kinds of fabrics. They also have powerful steam output, a stylish and comfortable design, and drip-drop systems that ensure the safety of users by auto-shut-off function. The soleplate can get clogged with limescale resulting in runny water and burnt limescale substance running out of the holes while ironing clothes. The 1st thing which you will often notice about this iron is the artistic look. It will completely gel with your modern decor in your home. The water tank is entirely detachable as well. This makes it easier for you to fill the water tank. In addition to this, there are quite a few features of this steam iron which you need to look into. Features of Morphy Richards Jet Steam Generator To fix this problem, regularly descale your iron. If the issue is not resolved, the heating device is defective and requires replacement. I did have to open up the iron to get access to the other end of the tube. Like the other answers you need a special screwdriver to get them out. Got round it by filing a slot in an old screwdriver i.e. you just have to improvise.

There are a number of parts inside a steam iron that could stop working for no reason at all, or if you’ve got an older steam iron, parts may have been worn down with age. These parts include a filter, the boiler pump, and cables.

The problem with most of the steam irons is that they are very difficult to clean. However, you will not have this particular problem with this steam iron. It is simply one of the best steam irons which you can get your hands on. This is the reason why the usual jet steam iron problems do not impact this particular iron. It has anti-Calc which does not allow deposition of calcium. This ensures that you do not have to worry about cleaning the steam iron with any special arrangements. The Calc will be automatically removed which ensures that the release of steam is regular and uniform. Cord length of 1.6 metersIt may be tempting to keep pushing the steam button, over and over again. But you won’t achieve anything by doing this. To fix this issue, clean the soleplate of the iron using soapy water with a sponge. Another alternative is to use vinegar water with salt. Make sure to power off the iron when cleaning. The next step was to try and narrow down our search even more. So we’ve already looked the prices of products in the Irons category. Then we’ve also looked at the prices of products from Morphy Richards. So this step combines the two and looks specifically at the price you’d expect to pay for Morphy Richards branded products in the Irons category. Inside was solid with scale! Scraped it out with a screwdrive & cleaned it up with a pan scourer. Make sure you don't scour the mating surfaces i.e. between the lower and upper halves. Oh, yes there was a circular deflector plate inside - also caked up with scale! Disconnect the hose between the steam generator and the iron. Make sure the plastic insert remains on this bit of hose.