Manufactured by Radius Systems provides the installer with a dependable product that will perform. Unlike previously used materials such as iron or copper, MDPE water main is made from corrosion free material meaning it will not degrade to any great degree with age. Naturally, making it the UK’s manufacturer’s most common choice of material for water pipe. If you need to connect your MDPE to older materials, adaptors are available. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000 above ground water distribution only.

If you plan to run any water service underground, we would always recommend that the water pipe is buried in the ground inside a blue water duct system. A duct is designed to protect the pipe from damage and alert others to the presence of duct in the ground. Water caution marker tapes are commonly used as additional indications, alerting presence of the pipes. If this is your first time installing ducting, we would always recommend attaching a second drawcord to your pipe as this will enable you to easily install replacements at any point in the future, if required. Your duct system may also need duct access chambers depending on your project, which come in a various sizes to suit.Solid wall 50mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. BS EN 12201 replacedBS 6572 and is the latest standard for plastic pipe systems for water supply. If BS 6572 is specified, use BS EN 12201 pipework. Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. This 50mm MDPE mains water supply pipe comes in coils of 25m, 50m, 100m & 150m, complete with an end closure at each end to protect the pipe from any dust or unwanted substances from manufacturing to installation. Also known as alkathene, this flexible & lightweight pipe is made from MDPE and fully compatible with approved mechanical, push-fit, compression and electrofusion jointing techniques.

Specifications include SDR 9 with a maximum 12.5 bar operating pressure, WRAS approved PE80 materials, approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000, BS EN 12201-2:2011+A1:2013 (BS EN 12201 replaced BS 6572). BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

Corrugated Flexible Hose Pipe - 50mm (2 Inch) (ID) Per Metre