For outdoor environments, you can rely on a variety of versatile, weather-resistant options from the JBL Control Contractor Range. Providing excellent audio performance for indoor and outdoor applications, the Control 80 Series in-ground loudspeakers are fully IP-55 rated and deliver a 360-degree audio coverage. There are two models in the range, the Control 85M and larger Control 88M. Connection is by screw down terminal strip. Models with factory-installed 100V/70V line transformers are available, and the extensive use of high-tech materials promotes speaker life expectancy while increasing weather resistance. (Note that while some of the products are splash-proof, they are not claimed to be totally weather proof. The sub-bass unit is not intended for outdoor use). Protection circuitry is included inside the Control 23-1 , 25-1 & 28-1L providing power limiting to protect cross-over network and transducers. Mounting options Although the Control 40 series are more expensive than the other series, they benefit from an economy of scale when it comes to amplification. For large installations, you pay more per speaker but using half as many. The tap settings on the Control 40 series are generally double that of the Control 10 and 20 series, so actually the amp spec is usually about the same. W Continuous Program (2 hrs) 100 W (400W peak), Continuous Pink Noise (2 hrs) 75 W (300W peak) Continuous Pink Noise (100 hrs) mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fibreglass voice coil former, high-temp voice coil wire, optimised cone geometry, linear suspension spider, and FEA optimised motor structure.

dB ave. Continuous Pink Noise (116 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.

Please wait.

W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material. UL1480-UUMW Listed (S7232), EN54-24:2008 certified (Certificate No. 0359-CPR-00245), NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849 LF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.

Alongside the ultra-compact Control 62P, the pendant range includes four further models: the Control 64P/T with 4" driver, Control 65P/T with 5.25" driver and Control 67P/T with 6.5" driver. A specific narrow-coverage model named the Control 67HC/T is purposefully designed for high ceiling applications. The range is completed by the Control 60 P/S pendant subwoofer. mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure. The JBL Control 25-1 is a speaker that offers high-quality audio performance. This speaker is designed for both indoor and outdoor use, making it versatile for various settings. It features a two-way design with a 5.25-inch woofer and a 0.75-inch tweeter, allowing for balanced sound reproduction. Power Rating: 200 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system's ability to handle normal speech and music program material.

Product Overview

IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.

In this concise guide, we’ll break down the range and take a look at some of the most popular speakers. Small/Large The JBL ceiling speaker ranges will be well-known to any installer. The Control 24C/T in particular has been a mainstay in the industry for many years with different variants and iterations. One reason for the 20 Series popularity is that the drivers are all 16 ohms, meaning for smaller low-impedance installs it’s easier to run more speakers on a single line than it would be with a comparable 8-ohm speaker. They are also voiced to provide real clarity and presence to speech, making them ideal for speech and paging applications. If speech clarity in a ceiling speaker is the particular requirement of a specification, the Control 26 C/T is the most recommended model. LF: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former Enclosure: High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.Recommended Protective High-Pass: 60 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation. at 1m (1kHz–10kHz, ave., at 8 ohm bypass mode);71 dB, 1W at 4m per EN54-24 (100 Hz – 10 kHz, ave., 60W tap) The JBL Control 25-1 features a sleek and discreet design, enabling it to blend seamlessly into any environment. Its compact size and neutral appearance make it suitable for both commercial and residential settings. HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton voice coil former.

Billed by JBL as “The most significant advance in sound contractor’s tools since the fishtape”, this range is designed “for indoor and outdoor applications ranging from restaurants, clubs and upscale retail establishments to health clubs and amusement parks”. These speakers are intended for permanent installation. Enclosures are moulded from high-impact polystyrene, lightly textured, ready for painting when decor matching. High frequency drivers offer horn-tailored directivity and the compact dimensions and adjustable mounts supplied help the installer to place the full-range cabinets unobtrusively, with the easily-placed sub-bass unit available, for low-distortion low-band output. Regardless of the size of the installation, JBL Control Contractor Series has options to suit any application. Whether the architecture suits in-ceiling, on-wall, or pendant loudspeakers, the JBL range provides an array of options from ultra-compact to large room-filling power. What makes the sub-sat systems from the JBL Control Contractor range stand out - besides their quality - is their versatility. Thanks to similar sound character, frequency response, sensitivity, directivity, and impedance, it's possible to mix and match any Control 40, 50 or 60 Series speakers and subwoofers. F or instance combine Control 52 wall-mounted satellite speakers with a Control 40S/T ceiling subwoofer, or two Control 42C ceiling speakers and two Control 62P pendant speakers with a Control 50S/T floor-mounted subwoofer (which can often be discretely hidden in a design).High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance. The Control Contractor 60 Series pendant speakers come in a variety of sizes, with a sub-woofer option - and provide the ideal high quality speaker solution in venues with high ceilings or open-architecture. Likewise the Control 50 subwoofer is a particularly popular model as offers supreme versatility when designing distributed installed system s. It's often paired with on-wall speakers such as the Control 23-1's or 25-1's to great success.