Repeat the process for all other buttons you want to program on your universal remote. Ending the Learning Mode Once you’ve programmed all necessary buttons, end the learning mode. The way to do this will depend on your specific remote model. Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off” By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment. Be as detailed as possible when describing your issue. Let them know you’ve tried to find the code using various methods but have failed. Follow Their Instructions

to Connect a Virgin Remote to a TV (with Pictures) Simple Ways to Connect a Virgin Remote to a TV (with Pictures)

If you want to control other devices with the universal remote, repeat this process for each device, adjusting the device button as necessary.

Check the line of sight

If the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly. Put your universal remote into learning mode. This can often be done by pressing a specific button labeled ‘Learn’ or ‘Learning Mode’, but the exact method depends on your remote model. Teaching Commands If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

QANTEC - TV parts

Enter the four digit code for your TV's make from the list. The LED should then flash green twice. This shows you’ve entered a valid code. Once you’ve programmed your remote you’ll notice that the light on the top will flash green instead of red when using it for volume and mute control. With the Universal Remote Codes we can operate any device like DVD, various types of Televisions and also all other components. But the ability of universal remote may vary depending upon customer’s equipment operate any other component, so why late get the tv remote codes list from the above table. How To Program A Universal Remote?The remote can only store one device code at a time, so you can’t control more than one TV, unless each TV works with the same code. This also means that you can’t have a TV and an AV device programmed at the same time. Reset remote Press the device button for the TV on your remote (usually labeled as ‘TV’). The indicator light should then remain on. Begin Automatic Code Search

TV Remote Code List - Virgin Media TV Remote Code List - Virgin Media

This TV remote arrived safely and on adding a power source the red visible LED was lit without a button being pressed. No response could be obtained from any button. Your TV’s product manual is the starting point when seeking the 4-digit code for your remote. Manufacturers typically include these codes in a manual section for setting up and using universal remotes. The manual may list multiple codes, as different models from the same brand may require different codes. Take a moment to find your TV model in the list, and try the corresponding codes with your universal remote. No Manual? No Problem!

LTA550HHJ12 BL LED BACKLIGHTS FOR QANTEC 55QB84XXU

We're currently building two sepearate databases to give users the best and most informative ways of searching for their parts Search by Part Number There are three simple ways to setup or to configure a universal remote and the first one is Using a Keycode, Programming Via Universal Remote Code Search and Manual Setup. The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.