I have been using my MKi9100 for about a year, when it started having troubles. The pairing process passes, but during it a message “memory full” flashes on the screen. Have tried to reset to factory as it is described. Sometimes during the reset the system comes to a halt with a message “reseting to factory” or so. Left it on for an hour or so. Nothing happened. Switched of the ignition, reset again. Reboot, language change, home screen – everything is ok. Pairing process goes the same way – I can find mki9100 in my phone list as paired, and S10+ in parrot as paired. But during the pairing process the “memory full” flashes again. As I try to reconnect the phone – nothing is happening. Have tried different phones – no help. Software is no. 3 with some following numbers 🙂 Any suggestions? Have not tried to disconnect the car battery. I will do it now.

The newer versions have compatibility / bug fixes and have a much shorter boot sequence ( turn on time). Update preparation Parrot MKi9100 iti aduce muzica la bord. Dotat cu un cablu special, este compatibil cu diferite surse pentru muzica: iPod®, iPhone®, USB flash, telefoane cu Bluetooth® stereo (A2DP), dispozitive MP3 si alte modele analogice. Equipped with the latest connectivity technology, the Parrot MKi9100 enables users to connect their smartphones or other compatible devices wirelessly, eliminating the need for cumbersome cables. This provides a convenient and clutter-free experience while on the road. Hi I have a mki92100 kit. For some reason the display screen only shows half the output? The left hand side of the screen is blank. Is this an error of the screen or the control box. It is difficult to navigate as you cannot see a lot of the test. Plus I cannot factory reset as I cannot see this command. I have tried deleting the memory with no joy? I am thinking of getting a replacement screen but won’t if it will not help. Could 1/2 of the screen be dead?After the re-boot it may be necessary to set the language version again. Simply select the required language from the listed options and press remote control centre button to set the language. The MKi9100 will then re-boot again.

The Parrot MKi9100 car kit is a wireless device that features an OLED display for easy navigation and control. This car kit allows for hands-free calling and wireless music streaming in vehicles. The Parrot MKi9100 is also gifted for music. Supplied with a specific cable, it is compatible with all music sources, such as iPods, iPhones, USB flash drives, Bluetooth stereo (A2DP) phones, MP3 players and any other analogue players. For ideal music navigation, the screen of the MKi9100 displays the playlist along with the name of the artist and the title (iPod/iPhone connection or USB). Music is delivered through all the car’s speakers*, giving the driver and passengers exceptional sound quality and the breathtaking (Virtual SuperBass…). Looking for a Hands-free Phone kit for your vehicle, that can also be used as your car audio device?The really early versions of MKi9000 firmware were quite buggy and the boot up time was very long. Also, updates were made as new phones were launched. From memory you are correct that you need display version 3.1 for the Unika to work. This display version is set by hardware in the screen and cannot be updated. When we were installing MKi9100’s + Unika and the version was wrong Parrot would send us an updated screen and we would return the old one. Does the MKi9100 shut down correctly and show “Good Bye” on the screen ? If it doesn’t there is an installation issue which will cause memory errors. After you enter the update process it is vital that it is not interrupted – you MUST wait for the unit to re-boot itself after the screen goes blank. If the unit does not re-boot after a minimum of 5 minutes, something has gone wrong. Unfortunately, your choices at this stage are rather limited.