Any unused compound can be kept in the tub and submerged in water for use on another project in future. You must follow the instructions carefully when using porcelain tiles and depending on whether they are for indoor or outdoor use, be careful what bedding mix they are laid on. EASYJoint Original is available in four different colours; Mushroom, Buff Sand, Stone Grey and Basalt, you can point your paving to suit the look you love.

Always fully wash off the oil residue until you can no longer see a film on the water, ensure any material is swept of and no left to set on the paving. When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water. Work conscientiously not to leave any grains of sand on the surface or the rainbow effect caused by the linseed oil. Whilst not essential, it is strongly recommended to "point" or "strike" the surface of the joints with a suitable finishing tool. Once EASYJoint has set hard in the joints, sweep the paving with a stiff broom, diagonally to the joints, to remove any final traces of compound, especially along the edges of "struck" joints.The problem is that if you try to top up a joint it will not bond properly with the existing joint and over time the joint will fail. Please Note: This information is for guidance only, the above table is to be used as an estimate of the amount of EASYJoint required, we always recommend purchasing an additional 1-2 tubs to ensure that you have enough – it will also keep due to the unlimited shelf life.

Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3. Water can also help the compound flow in to the full depth of the joint cavity and aids compression of the compound.EASY Joint goes hard on contact with air, our EASY Joint needs to sufficiently dry out to allow it to cure properly. Utilise the same method when working with porcelain paving tiles as with working with stone or concrete. To ensure a strong joint that will last for years the depth of the joint should be at least 20mm deep. We offer a pallet courier service to UK mainland addresses from Monday to Friday (excluding Bank Holidays). EASYJoint is the original sweep-in jointing Compound and still the best truly "All Weather Paving Joint Compound" available and made in the UK.

This will assist in checking for low spots whilst ensuring the joints are uniformly below the surface of the paving. Be careful when using add-mixtures such as SBR or PVA as these can seriously affect the permeability of a mortar mix.Manufacturers We are proud to partner with the leading manufacturers in the construction materials industry and be an approved supplier. The paving must be saturated before starting and remain soaked throughout the application process - in fact, the wetter the better. Sealing is particularly recommended for porous paving slabs and setts prior to laying and jointing with EASYJoint, to reduce the risk of staining or efflorescence. Both have sand binder in them and work in similar ways however EASYSeal BCS is the superior product and lasts longer. EASYJoint can be applied in virtually any weather conditions, however it is best practice to ensure that ground temperatures are greater than 3 degrees during the grout installation.

Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained). If the joint has been 'struck' or 'tooled' this process may have to be repeated to achieve the desired finish. Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges. The joints can be cleaned by the cautious use of a pressure washer, keeping a fan type nozzle, at an angle, no closer than 150mm from the surface.You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. EASY Joint is the UK’s top selling paving jointing compound, favoured by professionals and DIY installers all around the world. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods.