There are other binding techniques which use hole punching. Coil binding uses a spring-like coil, threaded into the punched holes. Comb binding uses a plastic strip with "fingers" that clip into the punched holes. Both use their own types of specialized hole punches. Comb binding typically punches 19 or 23 rectangular holes (for letter and A4 paper sizes, respectively). Konica-Minolta specifies that the holes should be 11 ±1mm from the edge of the paper [6] for European 4-hole arrangements, contrary to ISO838. Find sources: "Hole punch"– news · newspapers · books · scholar · JSTOR ( December 2007) ( Learn how and when to remove this template message)

Appleton Standard Layout" (PDF). Archived from the original (PDF) on 2013-11-26 . Retrieved 2013-02-12. Whether you’re looking for a single hole punch or device which will work for several sheets simultaneously, we have a wide selection of hole punch equipment and accessories. From basic manual hole punchers to adjustable and premium versions, explore several versatile product choices, the perfect compliment to any desk drawer or stationery cupboard. A hole punch does not necessarily make round or square holes in a sheet of paper; instead, it may create certain shapes along the edge of the sheet. This is seen in discbound notebook systems, where loose leaves are bound together using plastic discs. For more information on loose leaf systems, see Loose leaf. International Standard ISO838 specifies two holes, with centers 80 ±0.5mm apart, and located 12 ±1mm from the nearest edge of the paper, and with the pair of holes positioned symmetrically along that edge. Each hole is to have a diameter of 6 ±0.5mm. Any paper format that is at least 100mm high can be filed using this system (e.g., ISO A7 and larger). A printed document with a margin of 20–25mm will accommodate ISO838 filing holes.

A hole punch, also known as hole puncher, or paper puncher, is an office tool that is used to create holes in sheets of paper, often for the purpose of collecting the sheets in a binder or folder (such collected sheets are called loose leaves). A hole punch can also refer to similar tools for other materials, such as leather, cloth, or plastic or metal sheets. Convenient and uncomplicated online shopping in no time at all! Our wide range offers you a huge selection of great brand products at unbeatable prices. This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Single-hole punches are widely used in the British Civil Service where papers are punched with a single hole in the upper left, and secured using a treasury tag. In Sweden, a four-hole national standard [7] is almost exclusively used. The centers of the holes are 21mm, 70mm and 21mm apart, 10.5 ±0.5mm from the edge of the paper. The guides help keep the paper in a straight line.

Anniversary of the Hole Puncher, Drawing by Gerben Steenks, 14 November 2017, archived from the original on 2021-08-20 , retrieved 14 November 2017 {{ citation}}: CS1 maint: others ( link) The United States and a few other countries use non-ISO paper standards, defined in ANSI/ASME Y14.1 and other intra-nation standards. Unlike ISO838, there appears to be no well-established official specification for ANSI paper hole patterns, and instead they are de facto standards, established by custom and tradition. Another standard also occasionally used in the US is a "filebinder" system. Its two holes are positioned symmetrically, with the centers 2 + 3⁄ 4 inches (70mm) apart. The most common use for multi-hole punched paper is with a ring binder. A book-like cover is fitted with retaining rings matching the pattern of the punched holes. The rings may be split open, paper sheets threaded onto them, and then the rings closed again. Xaver Frühbeis (14 November 2000), Renate von Walter (ed.), Geburtstag des Lochers[ Birthday of the Punch] ( RTF) (in German), Bayerischer Rundfunk, archived from the original (RTF) on 2004-09-02Specialized hand-operated tape punches were used to perform small edits and repairs on punched paper tapes used for data entry into teletypes or early computers. Torn or damaged tapes were sometimes aligned with specialized jigs, spliced with special adhesive tape, and the holes encoding data were manually restored using such punches. The ASCII character code included a special DELETE or DEL character defined as all holes punched out (code 7F), allowing an erroneous character to be canceled by punching extra holes. SS 62 81 02: Dokumentförvaring – Fästhål för dokument[ SS 62 81 02: Document Retention – Holes for Filing Purposes] (in Swedish), Svenska institutet för standarder [Swedish Institute for Standards], 2006-06-06 , retrieved 2020-08-07 The essential parts of a hole punch are the handle, the punch head, and the die. The punch head is typically a cylinder, with a flat end called the face. The die is a flat plate, with a hole matching the head. The head can move, while the die is fixed in place. Both head and die are usually made of a hard metal, with precise tolerances. One or more sheets of paper are inserted between the head and the die, with the flat face of the head parallel to the surface of the sheets. Moving the handle pushes the head straight through the sheets of paper. The hard edge of the punch vs the die cuts a hole in the paper, pushing the cut piece out the bottom of the die. The cut-out bit of paper scrap is called a chad.

Concerns have risen about the lifespan of the hole punch as most paper documents are now online, making the use of it irrelevant. hole system exists. It is still in use today, but is not as common as the 3-hole standard. The four holes are positioned symmetrically with centers 3 + 1⁄ 2 inches (89mm) apart. The four binding positions provide more support for the longer 14-inch side of legal paper. For the US letter paper size ( 8 + 1⁄ 2 by 11 inches, 220 by 280mm), a three-hole standard is widely used. The holes are positioned symmetrically, with the centers 4 + 1⁄ 4 inches (108mm) apart. It requires paper formats that are at least 9 + 1⁄ 2 inches (241mm) high.

There are hole punches which punch patterns of multiple holes at once, typically for binding multiple sheets together (see §Applications). Such punches generally feature two paper guides for alignment. One guide will be along the side of the paper to be punched, and sets the distance of the holes from the edge of the paper (the margin or gutter). The other guide will be on a perpendicular side, and aligns the holes between the top and bottom of the sheet. One or both guides may be adjustable. a b "PK-520 Punch Kit Installation Manual". Konica Minolta. p.E-4. A3ET-9550-01 . Retrieved 2021-12-22.