Another nice thing about this cleaner is that it’s designed to be used with a full tank of gas, and often. You just pop the gas cap and run the bottle through the tank. With lots of options you add the mixture to a nearly empty gasoline tank and idle your engine for a while to run some gas through. With this one, you pour the recommended amount into your near-empty tank of gas right before you fill up and the pump. When filling the tank, the cleaner is mixed up with the gas and gets to work cleaning your engine continually. With this Red Line injector cleaner, just pour it in and let it do its work. Are you looking for a good fuel injector cleaner to clean up the gunk from your engine, and extend its life? Is it time to replace the one you’ve been using? Fuel injector cleaners are an essential part of any car owner’s toolbox. Lucas might just be the right brand for you and your vehicle. Fuel Injector Cleaner FAQs Pour the cleaner straight into your tank:Just like you were filling it with gas, pop the lid off and drain the contents of the bottle into the fuel tank. Please ensure your vehicle is off, though I hope that goes without saying.

The formulations of some fuel injector cleaners vary, though most at a minimum include detergents, including PEA (Polyetheramine), the leading active ingredient that helps clean and clear away these harmful deposits and prevent clogging. Others feature lubricants for the upper piston rings on the cylinders that help seal the combustion chamber. I thought you’d never ask! We’ve put together a review of Lucas fuel injector cleaner and compared this brand to the other top choices on the market. Now that you have an idea of what to consider in a fuel injector cleaner, you are ready to learn about the difference between specific brands. One key thing that you need to know is that this cleaner is not suitable for diesel vehicles or LPG fired engines. It needs to be added to a a full tank of gas, but this complete formulation can foul diesel fuel. This is one of those products that is strictly for gasoline engines, so have that in mind. Even if you are careful about using the recommended and high-quality fuel for your engine, contaminants can still make their way into your fuel system from the gas station’s underground tanks. Short trips and stop-and-go driving can also provide an opportunity for particulates to settle out and for varnish to form, decreasing your engine’s efficiency—and power.Step Five: Fill up your gas tank. It is advisable to use the fuel injector cleaner when your car’s tank is almost empty so that as you refill your fuel tank the fuel injector cleaner is properly mixed with the fuel, that way the fuel injector cleaner gets to the fuel injectors faster. It reduces emissions, eliminates tonging and pinging, eliminates the need for higher octane fuel, and deep cleans your car’s whole fuel system and combustion chamber. The only question is, how do you know which is the best fuel injector cleaner for your vehicle? Take a look at these most important factors that you need to consider: Type of fuel injector cleaner

Up next, we’ll introduce you to Lucas fuel injector cleaner, then go through four competing products one by one, and show you what each has to offer. Lucas Fuel Injector Cleaner Since carburetors were phased our around 1980, every new internal combustion engine gets the fuel into the chamber with injectors, including diesel engines (don't use a gas engine-only injector cleaner in a diesel, though). The process is controlled by the ECU (engine control unit), so the injector will always supply the fuel right when the engine needs it. Timing is very important, as injecting fuel too early or too late can will the engine not to work as expected or even damage it. This injector cleaner is even more efficient when it is added to your gas tank right before you add fuel into the tank so that the fuel injector cleaner completely mixes with the fuel and flows into the fuel injectors as soon as you start the car. Fuel injectors are equipped with electric controls that often receive signals from the engine computer system. This computer will then interact with the injectors, determining the right amount and timing of fuel distribution.It’s perhaps one of the most discomforting questions as it brings a lot of “Oh no’s.” Why do we say this? It’s because it should last as long as the cargoes. So why, then, is this even a matter for discussion? Using fuel injector cleaners is a pretty simple task and anyone can do it—there is no need to go to a mechanic. Before you begin, it's important to use a fuel injector cleaner on a close to empty gas tank just before you're about to fill up at a gas station. Fuel injectors are godsend and are a great alternative to fixing initial fuel injection problems. However, we’d like to remind you that car trouble is caused by a lot of things. There will always be more than one variable at play here. Pour the fuel injector cleaner into the fuel tankOpen the bottle and pour the fuel injector cleaner. Use the funnel if one is provided with the bottle so nothing spills out. Some bottles have additional measuring devices on them (attached to the bottle). Be sure to fill them with the right amount of cleaner before pouring it into the tank. Lucas’ formula is designed to eat away all the gunk left behind by the burning of fuel in your engine. It even burns away all the unnecessary emissions that come from your engine. From here, it cleans as well as lubricates your fuel system, including your car’s piston rings.

Regular fuel cleaning is the best way to keep your engine running smoothly, but of course, you can always make that process more efficient and enhance its positive effects by using specialized fuel injector cleaners.The Chevron 65740 Techron Cleaner works great for when your engine refuses to start or when you’re dealing with a car that has had it rough for a very long time. What makes this one of the best in my books is that it’s versatile to use among a wide range of vehicle types. Plus, it doesn’t just clean your fuel system. This strong concentrated detergent is equipped with synthetic cylinder lubricants as well and goes beyond your fuel injectors and into improving your valves, combustion chambers, and other auto parts. It's a little like an aerosol spray can: A bottle already pressure with a small nozzle that atomizes the liquid into very small particles. The fuel injector works similarly, with higher much pressures, smaller nozzles, and precise metering to create a fuel vapor that combusts predicably, efficiently, and cleanly. Newer injectors for direct injection engines even have several nozzles on the tip to help for a better air-fuel mixture.

For example, fuel goes bad. If you park your car for a couple months while you’re on a top or simply not using it, the gasoline will degrade and can cause issues within your engines combustion chambers. Additionally, fuel stations occasionally have contaminants introduces into their fuel tanks. These contaminants can build up and start to reduce the performance of your engine. And that’s where a fuel injector cleaner product can swoop in and save the day. Ah, but there's the rub. Lots of people claim to feel a positive difference in power and performance after using an EFI-cleaning fuel additive. Was it the product? Without taking apart the engine, it's impossible to say. At the same time, a lot of people report even rougher-running engines after using a fuel injector cleaner. When this happens, the general consensus seems to be that these products are too good at cleaning the entire fuel system, causing particles of buildup to dislodge, run through the lines, and clog up the very part they were intended to clean. Fuel Injector Cleaners Pros/Cons

Fuel Treatment

The secret to Liqui Moly’s great cleaning action is a unique additive of Molybdenum disulfide. It’s an impressive lubricator for your internal components and fuel system. It’s a great product to first clean out carbon, gunk and grime, and then follow up with lubrication. When a fuel line gets partially clogged it stops your cars ability to generate power. The key to maintaining your entire fuel system is to maintain the internal components clean, often using a product like this. Ideally for best results, you may want to use this cleaner when you’re at less than 1/4 tank of gas. This is also one of the products you’ll want to use a couple times to get the most out of it – you don’t just brush your teeth one time, do you?