The Makita DHP483 has been developed for light duty tasks, with compact body and great endurance thanks to its brushless motor. At only 176mm long and 1.6 Kg with a 3Ah+ battery attached, this drill can be used above your head or in tight spaces with minimal fatigue. Well balanced, and full of features, this combi drill is incredibly versatile. With 2 mechanical gears, electric brake, and dual-rotation modes, this drill delivers up to 1700rpm no load speed, and up to 25,500bpm. c) If there were no goods supplied 30 days after the day on which we are informed about your decision to cancel this contract NEW impact mode (A-mode)helps eliminate 'screw cam out' and 'cross threading' by driving at low speed until the start of tightening

Makita DLX2221ST 18v Brushless Twin Kit DHP483 Combi + DTD155 Impact Driver Inc 2x 5.0Ah Batteries, 1x DC18SD Charger and 1x Carry Case x tic-tac tub containing 25 x 25mm PZ2 bits and 36 x 25mm screwdriver bits (6 x Torx (T10, T15, T20, T25, T30 and T40) Model DHP483 is a Cordless Hammer Driver Drill powered by 18V Li-ion battery. Featuring the Makita Brushless motor, precision engineered to be up to 50% more efficient than a comparative model. Without brushes in place to apply friction a Brushless motor can produce a greater measure of torque per weight. With more torque at your disposal less power is required for day to day use, adding to the motors efficiency and extending the products overall lifetime as maintenance becomes less of an issue. Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x 5.0Ah Batteries, DC18SD Charger and a Carry Case.

The soft grip handle allows for comfortable use over extended periods, while the LED light brightens up your work area. The drill is equipped with a battery protection circuit to prevent any damages from over-discharge, overload and high temperatures. Variable 2-speed, reversible, brushless motor Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain The Makita DTD155 18V LXT Brushless Impact Driver is a compact, slim bodied driver that delivers exceptional power. The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x 5.0Ah Batteries, DC18SD Charger and a Carry Case. MAKITA DHP483ZJ 18V LXT BRUSHLESS 2-SPEED COMBI DRILL

The Makita DTD155 is a cordless, Brushless Impact Driver powered by 18v Li-ion battery and has been developed as an 18 volt version of the TD111D. It features Makita's new impact mode, "A-Mode" aka "Assist Mode" which helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening. The Makita DLX2221ST is a convenient 18-volt cordless twin set comprising two compact tools: the DHP483 Combi Drill with 20 clutch settings capable of delivering up to 40 Nm of torque, designed for light drilling and screw work, and the DTD155 Impact Driver with electronic 2-speed impact power selection, based on the 18-volt version of the CXT TD111D. This 2-piece kit comes complete with 2x 5.0Ah Batteries, a DC18SD Charger, and a handy Carry Case. Features & Specification: DHP483 Combi Drill After 30 days if you are not satisfied with a product or it has failed or become defective, please notify us at [email protected]. DAMAGED CONSIGNMENT Electronic two-speed impact power selection and v ariable speed control by trigger- adjust the speed to suit the application and material Assist Mode: helps to eliminate screw cam-out and cross threading by driving at low speed until the start of tighteningThis great set includes the DHP483 Brushless Hammer Drill Driver with impressive specification plus the DTD155 Brushless Impact Driver ideal for repetitive screwdriving. The impact driver has a max 3000rpm no load speed providing up to 3900ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood. The Makita DLX2221J is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x BL1830B 3.0Ah Batteries, DC18RC Fast Charger and a Makpac Type 3 Connector Case. Makita DHP483ZJ 18v LXT Brushless 2-Speed Combi Drill Lightweight and compact combi drill has 2-speed gear box with all-metal gears for extra durability. Excellent for work in compact spaces.

The cross cut saw can only make square cuts. Other agencies, mitres, grooves or points cannot be cut. Impact driver Features assist mode, which slowly increases the power delivery as the unit comes under load, making it easier and more efficient to drive fixings. Makita DLX2131TJ 18v LXT DHP482 Combi Drill & DTD152 Impact Driver Twin Kit with 2x 5.0Ah Batteries in Makpac Type 3 Connector Case Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions Electronic brake, a conveniently located push button for forward and reverse, and an LED job light with pre glow for use in low visibility applications.

You might also like

This saw is supplied to allow the cutting of strip wood and structural timbers. Only non-panel products that conform to the following can be cut using this saw: The DLX2131MJ2 (DLX2131) twin kit from Makita contains the DHP482 Combi Drill and the DTD152 Impact. This version comes with 2x 5.0Ah BL1850B lithium-ion batteries. The DHP482 is a compact and precise power tool for the professional or DIY enthusiast and the DTD152 is a cordless impact driver developed for applications such as the tightening of self-drilling screws or light duty machine screws. The DLX2131TJ comes supplied in a Makpac type 3 connector case with plastic inlay. Featuring an improved impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening. Brushless motor, electronic 2-speed impact power selection, one-touch bit installation.