The Monsoon Energysaver TM IntelliSense i7 is a bathroom fan that is quiet yet versatile enough to ventilate bathrooms, toilets and utility areas. The Intellisense i7 has six core ventilation modes for performing air extraction in all homes with natural ventilation. It has been designed and approved for installation in wet areas (IP44) such as WCs, bathrooms and utility rooms. It is for mounting on the wall or ceiling. The seventh mode is the heat mover which allows the fan to transfer surplus heat to an adjacent room. Households also have a list of must-haves to consider with low noise levels and good IAQ at the top of the list. There are a range of fan control options on offer, including basic and timer control as well as humidistats that react to changes in humidity or PIR sensors to identify room occupancy, allowing fans to be tailored to a households’ individual requirements. For example, the Monsoon Zone 1 Silence Range improves IAQ and boasts an exceptionally quiet running volume as low as 22dB(A). It also features rubber anti-vibration mounts, designed for motor vibration absorption and noise insulation.

And finally, aesthetics are increasingly important to consumers. Plastic can degrade and discolour over time and so the option of a casing and impeller made of durable high-quality UV-resistant plastic which will maintain its look over time is a great feature. We not only supply ventilation products, but we also have the knowledge to support electrical wholesalers in completing their projects on time and on budget.Most domestic bathroom extractors attach to a 100mm hole in the outside wall. If you’re replacing a standard-sized extractor fan, this hole will already be present and you should be able to install the new one yourself. Before you remove the old fan, it’s a good idea to take a photo of its wiring for later reference – and make absolutely sure you shut off the mains power before you take the old one’s front housing off. Alternatively, a chrome finish, available with Monsoon Zone 1 Silence range’s 100mm models, matches well with any modern interior.

Highly energy efficient with a consumption of only 7.5watts and with an airflow of up to 97m3/h the Silence 100T is a slim profile fan ideal for wall or ceiling mounting.This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest. Giving you customisation over the operation of your extractor fan with two performance settings alongside a customisable overrun timer, allowing the fan to run between 2-30 minutes after the room has been vacated. MON-S100T features an extremely quiet operation volume of only 25dB(A) @ 3m, ideal for discreet, unobtrusive operation, maintaining a quiet bathroom. The Monsoon Silence MON-S100T is an IP45 sleek, quite running 4" bathroom extractor fan with the ideal combination of high efficiency and silent operation which is achieved by a special aerodynamic profile of a mixed profile impeller. The PureAir Sense comes with two spigots (or sleeves): one for standard 100mm installation and another for larger 125mm portals. The larger spigot is the one to fit if you want to benefit from its excellent 39l per second flow rate. That said, its standard 32l per second flow rate is still better than most and easily good enough for the majority of bathroom installations. With over 30 years of industry experience, we fully understand the diverse electrical wholesale market. We work exclusively with electrical wholesalers, supplying you with the superior ‘Monsoon’ brand of products and offering you our full support when you need to specify ventilation systems.