Recommended receiver: RX150CS (where 18Gbps CSC, Long Range Mode, LAN, Audio Return, and 24V PoC support is required) HDMI audio breakout to Optical (S/PDIF) digital, or analogue L/R audio outputs with variable pre-amp line level control A/V Mute function gives complete distribution control to a user allowing the signal to any zone to be independently switched off The maximum cable length for DigitalMedia Fiber (DM Fiber) is 1000 ft (300 m) using CRESFIBER (legacy), CRESFIBER8G, or third-party OM2/OM3 duplex multimode fiber optic cable.

CMX88AB — Blustream

Features 8x HDMI inputs which can be independently routed to 4x HDBaseT™, and 4xHDBaseT™ / HDMI outputs Comprises (8) DMNet ports with "EIG" power selection ports, each set is associated with the corresponding DM CAT output port on any installed DM CAT output card; SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution Flexible Control — Front panel, RS–232 (K–Router™ Windows®–based Kramer software is included), RS–485, Ethernet & IR remote (available upon request) . Configurable via modular plug-in cards supporting HDMI (Dual-Mode DisplayPort compatible [11]), 3G-SDI, analog (stereo 2-channel), SPDIF, DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streamingdigital multichannel audio-follow-video matrix switching, plus independent 8x8 stereo matrix for audio breakaway Distributes 1080p and WUXGA signals over multimode fiber at distances up to 1000 ft (300 m) via DM 8G® Fiber [5,9] Scaler – features a video scaling function to convert input resolutions to the optimum display resolutions It features four digital optical Toslink outputs with support for 7CH LPCM, Dolby Digital, Dolby Digital +, DTS, DTS Master Audio. For external DMNet power, use a Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply as required. Do not interconnect DMNet with Cresnet.

C88CS — Blustream

Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission Down Scaling -This technology is managed on each output. Scaling will allow integrators to downscale 4K sources on outputs going to displays that may not support 4K. Additionally, this matrix switcher can scale chroma subsampling from 4:4:4 down to 4:2:0, ensuring compatibility with legacy devices. Other matrix switchers force a signal to work by “dumbing down” the entire system even if there is only one old 1080P display. Ultra HD, and HDCP 2.2 are currently supported over HDMI, DM 8G+, and HDBaseT using select input and output cards. Refer to the specifications for each input/output card and each connected device for its full capabilities.The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using CRESFIBER8G multimode fiber optic cable, or 500 ft (150 m) using CRESFIBER (legacy), or third-party OM3 multimode fiber optic cable. In addition to transporting digital video and audio, DigitalMedia can also extend 10/100 Ethernet out to each display and source device via select DM receivers and transmitters, providing high-speed connectivity for any room device that requires a LAN connection. Ethernet is also utilized internally by the Crestron control bus to manage the DM devices in the system and provide display control in each room.

120 Series HDMI Matrix Switcher with HDMI Outputs Binary™ 120 Series HDMI Matrix Switcher with HDMI Outputs

High-performance H.264 streaming capability enables enterprise-wide distribution of HD content over an IP network. Streaming expands the capabilities of DM to remove all distance limitations and allow distribution to virtually any device — anywhere in the world. Streaming is an essential component of any complete DM system, allowing for high-definition signal routing to Crestron touch screens, digital signage displays, remote buildings, and global offices without requiring any new or dedicated wiring. Large-scale streaming to computers and mobile devices can be facilitated through integration with a streaming media system such as Wowza® or Kaltura®. Distributes Full HD 1080p, Ultra HD, and 4K signals over CAT type twisted pair cable at distances up to 330 ft (100 m) via DM 8G+® and HDBaseT [4,9] to 1080P Down-Scaling (Resolutions Only, Framerate Stays the same), and 4:4:4 to 4:2:0 (See manual for more info) Consumer Electronics Control (CEC) allows interconnected HDMI devices to communicate and respond to one remote control Still can't believe it's only hours after I received the unit and it's completely set-up and working. I had other units that either took days to set-up correctly, or never did work.HDMI is the key to handling 7.1 surround sound formats like Dolby TrueHD, Dolby Atmos, and DTS-HD Master Audio. Great for your high-end home theater, but how do you share that same source with other audio zones in the house? Integrated Ethernet networking and USB distribution provide a complete connectivity solution combined with built-in Crestron control [2] for managing the displays and other room devices without necessitating any additional wiring. User-friendly operation, setup, and troubleshooting tools are provided through the DM-MD8X8 front panel, or via Crestron Toolbox™ software, to make setting up a complete multiroom 4K video distribution system easy. High definition audio format support: LPCM 7.1CH, Dolby TrueHD & DigitalPlus and DTS-HD Master Audio HDMI audio breakout to associated output analogue L/R audio and coaxial digital outputs concurrently