HydroForce™ Rainwater Harvesting Pump has been engineered by HydroForce Pumps Ltd in Peterborough, England to respond to the demand for the highest quality pump for use under water in rainwater harvesting tanks. Using the most rugged components it has been exhaustively tested for trouble-free running. Powerful Pump & Essential Features. At the factory in Peterborough each pump is tested individually, pumping water through a pre-determined cycle to ensure performance is to spec, and the performance of each pump is automatically logged against its bar code number to assure the client of its quality. Specifications

See below for an overview on the HydroForce™ Series 3's development and high quality manufacturing.This SUP is constructed with drop stitch material where thousands of fibers connect the top and bottom of the board. This provides exceptional strength and rigidity, similar to a hard-sided board, while still keeping it lightweight, portable and easy to store. performance is to spec, and the performance of each pump is automatically logged against its bar code number to assure The exterior bodywork is an Italian-styled shape which is stable in the floor of a water tank. The pump and electrics are totally new, engineered to give more reliable underwater performance. Now an alloy bulkhead, pressure release gap and twin chamber design prevent ingress of water to motor, electrical components and to bearing oil.

The pumps have their pressure and flow rate tested twice at different stages of assembly. the performancetighten the screws to the correct torque- preventing splitting the casing if too tight or ingress of water years of trouble free running. Components were tested to extremes, and prototypes were meticulously guarantees the plates are within tolerances of 0.001 mm and the size critical parts need no machining. The HydroForce™ pump has been designed and engineered by HydroForce™ Pumps Ltd in Peterborough to respond to the demand

Dry-run Protection: when no water is detected for 8 seconds, the pump is turned off by the printed circuit board With one streamlined fin, the Oceana SUP provides you with total directional stability and manoeuvrability when out on the water. The Oceana even comes with a deluxe travel bag, a surf leash and one repair kit so you can transport and maintain your board with ease.Inlet port 1 inch (25mm) female BSP. Output port 1 inch (25mm) female BSP provided with a push-fit connector for 1 inch (25mm) MDPE pipe. The Series 4 will deliver up to 3.5 bar (household pressure is around 2.5-4.0 bar). If connected to a hose or tap, the pump will automatically start to pump water when the tap or hose is turned on. The pump delivers over 2500 litres per hour using a 1″ connector and uses 800 watts at 220-240v AC delivered by a 5 metre cable. Inflating a paddle board requires a pump that provides air with high levels of pressure so you can inflate your board in a reasonable amount of time and get into the water as soon as possible. Browse our range of Decathlon SUP pumps including manual and electric paddle board pumps to find your fit. Decathlon SUP Pumps All pumps go through a rigorous testing programme. First the pumps are subjected to a 4 stage electrical Early in 2009 the research and development team at HydroForce™ Pumps Ltd focused their efforts to produce a highest quality