Nearly all other push sticks or push blocks would come in contact with the table saw blade for similar cuts. Adjusts to varying material widths, allowing you to control both the keeper and off-cut sides of your workpiece through the entire cut. There are a few alternatives to the MicroJig Grr-Ripper however they come with limited features or adjustability. If you plan to be a woodworker long-term and want to take tool safety to the next level the Grr-Ripper is what you need. The push block comes with an adjustable handle that can be angled to allow for inward pressure toward the rip fence.

Always keep your hands at a safe distance from the cutting tool and have full control over your workpiece. We have a wide selection of metal cutting tools and tools designed to remove material from your project. If you choose to get the GR-200 it is essentially the same except for an extra stabilizing plate and adjustable space. Re-saw on a table saw with total control over the work-piece using the GRR-Ripper 3D Pushblock System.To cut tapers on wide panels, you can help feed the material with your other hand, provided it’s no less than 12” from the blade. Use it as a router table guide for bullnose routing and eliminating snipe from your full-profile cuts.

Busy Bee Tools sells metalworking equipment that professionals and serious hobbyists can rely on to get the job done. I immediately discovered that the jig offered more control than my other pushers; no doubt a result of the high friction pads on the adjustable and fixed legs. Even though the Grr-Ripper push block is expensive in comparison to other push sticks and push blocks, it's a highly versatile tool that will help keep you safe and prevent accidents more than the alternatives.Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. With safety the over riding factor, we wish to make it clear that the GRR-Ripper™ System is not intended to replace or interfere with the saw table blade-guard combination. Like a featherboard, it keeps wood locked against the fence for a smooth cut – virtually eliminating binding. The GRR-RIPPER® provides downward and inward pressure, keeping both sides of the cut parallel to the blade.