The BT506 Does Not Have a Screen! To Perform Testing and Display Test Results the BT506 Must be Used withAutel MaxiSys MS906 PRO and Higher Level Tablet Tools Cranking & Charging Test, Electric Reset- Autel BT608 battery load tester can run a complete test on automobile cranking and charging system. Adaptive Conductance algorithm to fast test the starter/generator and complete diagnostics for all electrical systems Autel MaxiBAS BT608 car load tester is designed to test 6V/12V Flooded, AGM, AGM Spiral, EFB and GEL batteries with CCA(100 to 3000 CCA), CA, SAE, EN, IEC, DIN, JIS and MCA standards. BT608 can test the battery state of health, offers illustration instruction guides for battery positioning and testing. Multi-Language Supported:English, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian Sometimes due to strikes, natural disasters and other force majeure factors, delivery will be delayed。

The BT608E with an extra screen wiper is a touchscreen Battery & Electrical System analyzer that applies adaptive conductance to produce a more accurate examination of the battery’s cold-cranking ability and reserve capacity, vital to determining a battery’s health. Following is the benefits of adaptive conductance technology:

MaxiBAS BT506 Battery Tester

Autel advanced battery tester MaxiBAS BT608 is a professional analysis tool for testing 6- and 12-volt batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries. With the Adaptive Conductance technology, you can get the most accurate test results and deduce the mis-diagnosis to lowest, 95% battery accuracy and 100% detection rate of bad battery. Autel PowerScan PS100 is the best electrical tester for reducing diagnostic time in all 6- to 30-volt vehicle electrical systems. After a simple hook-up of the tool to the vehicle's battery, you can: Autel BT608 is not only a professional battery tester, but also an ideal wireless OBD2 FULL SYSTEMS scan tool, which has the same vehicle/year coverage as autel MX808/ MK808/ MK808BT. It can read/ clear full system fault codes/ view DTC descriptions, live data and freeze frame data for 80+ US, EU and Asian cars, up to 2019/2020, and a few 2021. With lifetime free updates, supporting newer cars, BT608 is an ideal full systems scan tool. Additionally, for certain products sold on AESwave, we also provide the following warnings based upon California law:

Voltage: The difference in electric potential between the positive and the negative terminals of a battery.

QUESTIONS & ANSWERS

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. The Autel MaxiBAS BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The Autel MaxiBAS BT506 enables technicians to view the health status of vehicle's battery and electrical system. Using with the Autel Tablets with a "battery test" icon, the Autel MaxiBAS BT506 (Chinese Version) is able to perform testing and display test results. Autel battery tester MaxiBAS BT506 applies Adaptive Conductance to gauge a battery’s conductance health. Compared with ordinary load testers, this technology allows multiple tests without draining the battery and to test batteries that are low or nearly completely discharged. This Autel car battery tool BT506 similarly uses Adaptive Conductance to test the battery’s partnering components, the alternator and starter to see if they can take and store a charge. To confirm the connection status, press & hold the power button on BT506, go to "Me >> BAS Manager". This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.

Registering the battery is a necessary step to let your engine control module (DME) know the newly installed battery, and the vehicle will reset the old battery statistics, which help you avoid the below issues: Battery Test: Follow the guidance provided, technicians can do the battery test. The battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips. Even when a battery is in a poor state of charge, the battery tester BT608E can accurately test its potential for stored energy without necessitating a recharge prior to test and expedite diagnoses. Starter Test: Follow the on-screen instructions, start the engine and let it idle. Then the test results of the cranking system will display on the screen which include starting voltage, starting current and starting time. To perform testing and display test results the Autel MaxiBAS BT506 (Chinese Version) only can be used with an Autel MaxiSys Tablet (Tablets require “Battery Test” icon) BT608 can test the health of a battery when it's not installed in the vehicle, just input the correct battery specifications based on the information printed on the battery's label, verify battery type, battery standard and battery capacity.Includes Bluetooth VCI, Clamp Cables, Four Battery Side Post Terminals (types S & T) and Thermal Paper Roll Autel PowerScan PS100 circuit tester contain 20ft (extendable) cable provides excellent accessibility to test along the vehicle Power Switch – Allows you to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components.

Autel MaxiBAS BT506 has positive and negative alligator clamps which are polarity protected, so even if you reverse the clamps and put the negative on the positive terminal, it is OK. In fact, the LED on the tester is color coded to alert the users of connection and testing status, so the testers will flash red to alert you that you have made the error. Autel has partnered with the Battery Council International (BCI) to provide OE battery specifications, battery locations, and vehicle reset procedures that may be required after replacing the battery. Disclaimer:Vehicle battery information does not cover all vehicles. Additionally, a vehicle's battery list may include more than one battery since BCI will list all options approved by the OE. A visual of the battery is still recommened when inputing battery type into the BT608. By depressing the power switch, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires. Out-of-vehicle Battery Testsingis Mainly for Batteries That are not Installed in a Vehicle, Like Battery Capacity, Type, Standard, etc. With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.Built-in Flashlight enables you to work in the dark Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip Press "Update" button on Home screen to install vehicle diagnostic application. It is free and permanently valid.