Woven: Clean the band with a nonabrasive soft cloth. If necessary, lightly dampen the cloth with fresh water and gently rub the band to get rid of stains. Hermès woven bands are swimproof. Let the band air dry thoroughly before you attach it to your Apple Watch. Don’t store leather bands in direct sunlight, at high temperatures, or in high humidity. Dip a lint-free cloth into the soapy water solution, wring it out slightly, and rub the cloth on the band gently for 1 minute.

Remember, for products which don’t come from Apple, follow the care instructions from the alternative manufacturer for the best results. Woven: Clean the band with a non-abrasive, soft cloth. If necessary, dampen the cloth slightly with fresh water and gently rub the band to get rid of stains. Hermès woven bands are swim-proof.For nylon and polyester bands, such as the Trail Loop, Sport Loop and Alpine Loop, the instructions are the same as for silicone. Wash with a damp microfiber cloth, using a mild detergent if necessary. Then rinse and dry as best you can, using a fresh microfiber cloth. Keep your Apple Watch clean and dry. Soaps, cleaning products, abrasive materials,* compressed air, ultrasonic cleaning, and external heat sources can cause damage and shouldn't be used with your Apple Watch.

Apple recommends simply wiping the band with a microfiber cloth, dampening the cloth with just water if necessary. You don’t want to use any abrasive cleaners for this task, as it could do some damage. Thoroughly dry your band as best you can with a dry microfiber cloth once finished, then leave out to air dry any final residual water before reattaching. Wipe your Apple Watch clean with a nonabrasive, lint-free cloth. If necessary, lightly dampen the cloth with fresh water. If your Apple Watch has substances or debris visible in places such as the speaker ports, you can hold your Apple Watch under lightly running, warm, fresh wateruntil it's clean. Soaps and other cleaning products shouldn’t be used.Rubber: Clean the band with a non-abrasive, soft cloth and fresh water. If necessary, you can use soapy water to remove stains. Hermès rubber bands are swim-proof and aren’t sensitive to light or cosmetics. If you’re dealing with a leather band, then Apple recommends a slightly different method. First, you can use a microfiber cloth to wipe the leather — you can even dampen the cloth with water for more of an effect. With leather, bear in mind you should always follow the grain as you clean. However, you should not submerge the leather band in water, or indeed hold it under running water. Leather is not water resistant, so you could damage or discolor the band by doing this. Wipe your Apple Watch clean with a non-abrasive, lint-free cloth. If necessary, lightly dampen the cloth with fresh water. If your Apple Watch has substances or debris visible in places such as the speaker ports, you can hold your Apple Watch under lightly running, warm, fresh water until it’s clean. Soaps and other cleaning products shouldn't be used. Keep your Apple Watch clean and dry. Soaps, cleaning products, abrasive materials*, compressed air, ultrasonic cleaning and external heat sources can cause damage and shouldn't be used with your Apple Watch.

Let the band air dry thoroughly before you attach it to your Apple Watch. Don’t store leather bands in direct sunlight, at high temperatures or in high humidity. Remove the bandfrom your Apple Watch before cleaning. This cleaning information applies to Apple-branded bands only. For all other bands, follow the care information provided with the band. Measuring at 8 inches with the Apple Watch, the band is further adjustable with optional extra links and an Apple Watch Band adjustment kit.Knit: Clean the band with a nonabrasive soft cloth. If necessary, lightly dampen the cloth with fresh water and gently rub the band to get rid of stains. Hermès knit is not swimproof, so you should avoid getting it wet. These materials will soak up residual water, so it’s best to avoid submerging them or holding them under a running faucet during this process. The wetter the band is, the longer it will take to dry. Thoroughly dry your band by leaving it for several hours in the sunlight, or ideally overnight before reattaching. Make sure there is plenty of air circulation as it dries. If you’re washing a soft fabric band, bear in mind that you may not be able to wear your Apple watch for several hours as it dries, unless you have a spare band. Wipe the band clean with a nonabrasive, lint-free cloth. If necessary, lightly dampen the cloth with freshwater. With these bands, you can also use mild hypoallergenic hand soap for cleaning. Wipe the band clean with a nonabrasive, lint-free cloth. If necessary, lightly dampen the cloth with freshwater. Remove the band from your Apple Watch before cleaning. This cleaning information applies to Apple-branded bands only. For all other bands, follow the care information provided with the band.

Avoid wearing the band during strenuous activities if possible. This will avoid exposure to sweat. If you love to wear your Apple Watch to the gym, make sure the band is cleaned and has time to breathe once you’ve finished working out. Knit: Clean the band with a non-abrasive, soft cloth. If necessary, dampen the cloth slightly with fresh water and gently rub the band to get rid of stains. Hermès knit is not swim-proof, so you should avoid getting it wet. Wipe the leather portions of the bands clean with a non-abrasive, lint-free cloth. If necessary, lightly dampen the cloth with fresh water*. Don’t soak leather bands in water. The leather bands aren't water resistant. Wipe the leather portions of the bands clean with a nonabrasive, lint-free cloth. If necessary, lightly dampen the cloth with freshwater.*Don’t soak leather bands in water. The leather bands aren't water resistant. Wipe the band clean with a separate cloth that's slightly dampened with fresh water.Don't soak FineWoven bands in water. This material is not water resistant.Wipe the band clean with a separate cloth that’s dampened slightly with fresh water. Don’t soak FineWoven bands in water. This material is not water resistant. Wipe the band clean with a non-abrasive, lint-free cloth. If necessary, lightly dampen the cloth with fresh water. With these bands, you can also use mild hypoallergenic hand soap for cleaning. Rubber: Clean the band with a nonabrasive soft cloth and fresh water. If necessary, you can use soapy water to remove stains. Hermès rubber bands are swimproof and aren't sensitive to light or cosmetics. Dip a lint-free cloth into the soapy water solution, wring it out slightly and rub the cloth on the band gently for 1 minute. Watch Bands marked "Fits All Band Sizes" is MACHETE'S advanced design with patented hardware to universally fit all Apple Watch Band Sizes. Includes a watch link adjustment kit.