There is no standard trowel size for tile installation as it depends completely on the type and size of tile you are going to install. Every type of tile requires a different sized tiling trowel. The main concern is the amount of coverage for the tile. RUBI manufactures tile trowelsin two basic types, the square-notched and the U-notched. They are measured in the same manner, the first number is the width of the notches (the distance between the teeth), the second number is the depth of the notch. The matting must be installed within the specified open time for the adhesive used and can be adjusted and repositioned within the specified adjustment time. Once laid, tiling can commence immediately. Features & Benefits of the Ardex B1 2mm V Notch Trowel

In addition to proper trowel selection, it’s important to use the correct thinset for each situation. For example, Schluter products are famous for their unmodified mortar requirements. Also, glass tile is usually something that needs very careful mortar selection. Thinset ConsistencyUsing an electric grinder becomes necessary when adhesive or mortar hardens on the trowel. With it, you can remove the hardened material from it. ● When should you replace your trowel?

Added “buttering” of the tile may be desired as per the wall, floor, or tile conditions. ● In what quantity do you require trowels for a tile installation project? Avoid Mistakes: Using the wrong amount of thin-set or the wrong notch shape will negatively affect the outcome of your tiling project. Tiling projects are not cheap, so ensure your tile stays secure for a long time by choosing the right tools. What’s reassuring is that even if your calculations are slightly off you can still make small adjustments to make up for variations. It is normal for anyone who is not a professional but is planning to install tiles on their own to have a few questions. The most commonly asked questions are as follows: ● How to properly use a trowel, some helpful tips: Consequently, what you should be asking is: “ Am I getting the proper mortar coverage underneath my tiles?” It’s all about the coverage

A V-notch trowel has V-shaped edges. This is the trowel to use when installing mosaic tile as it leaves the least amount of thin-set on the installation substrate. Whether you are installing small mosaic tiles, subway tiles, or large natural stone tiles, notched trowels are essential tools for setting tiles into place. Notched trowels scoop thin-set, a cement-based mortar adhesive, and spread it over floors and walls. The distinctive notches on the sides of the trowel create an even base of ridged mortar. When a tile is placed, the mortar compresses to provide a complete bond between the tile and the wall/floor. This bond will keep tile in place for years. Nevertheless, you have to be specific about the measurements. Trowels are measured by the height, or depth, and length of the teeth or notches. This means a ¼” x ¼” trowel will have a notch that is ¼” square. Tiling Trowel Size Guide In general, trowels come in various shapes and sizes. The three most used trowel shapes for tiling are the square notch, the V-notch, and the U-notch. A square notch trowel is mainly used for floor tiling and tiles over 2 inches square. A U-notch trowel can be used for the same tile types but delivers a little bit less mortar. A V-notch is mainly used for wall tiling and tiles under 2 inches square. It delivers less mortar than a square notch trowel. The trowel size depends on the size of the tile.