Find sources: "Drink can"– news · newspapers · books · scholar · JSTOR ( October 2023) ( Learn how and when to remove this template message) An empty aluminum can weighs approximately one-half ounce (14g). There are 34 empty aluminum cans to a pound or 70 to a kilogram. [11] While the presence of these acids is masked by the addition of sugar and other preservatives, Coke – and many fizzy drinks – still has a very acidic pH reading, especially when you consider that battery acid is not far off with a pH of 1.

Cans are filled before the top is crimped on by seamers. To speed up the production process filling and sealing operations need to be extremely precise. The filling head centers the can using gas pressure, purges the air, and lets the drink flow down the sides of the can. The lid is placed on the can, and then crimped in two operations. A seaming head engages the lid from above while a seaming roller to the side curls the edge of the lid around the edge of the can body. The head and roller spin the can in a complete circle to seal all the way around. Then a pressure roller with a different profile drives the two edges together under pressure to make a gas-tight seal. Filled cans usually have pressurized gas inside, which makes them stiff enough for easy handling. Without the riveted tab the scored section of the can's end would be impossible to lift from the can. In 2006, a new Sprite logo, consisting of two yellow and green "halves" forming an "S" lemon/lime design, made its debut on Sprite bottles and cans. The slogan was changed from its long-running "Obey Your Thirst" to just "Obey" in the United States and was outright replaced with "Freedom From Thirst" in many countries. This was the decade's first major shift in advertising themes.Full aperture end [ edit ] The Finnish brewery Fat Lizard uses "topless" cans where the entire lid is removed when opening the can. This section needs additional citations for verification. Please help improve this article by adding citations to reliable sourcesin this section. Unsourced material may be challenged and removed. Coca-Cola scraps Sprite 3G and focuses on Relentless". Marketing Week. August 1, 2007. Archived from the original on November 7, 2017 . Retrieved October 21, 2012. In 1959, the recyclable aluminum can was introduced to the market in a 7 oz. size by the Adolph Coors Company. [5] Previously, while on a family picnic, Mr. Fraze had forgotten to bring a can opener and was forced to use a car bumper to open a can of beer. Thinking there must be an easier way, he stayed up all night until he came up with the pull tab. [16] Pull-tab cans, or the discarded tabs from them, were colloquially called "pop-tops". [17]

A Re-Release of Sprite Remix Tropical, it was sold for a limited time in 2015, and again as "Sprite Tropical Mix" in 2016. In fact, the exposure limit of BPA – the point after which it becomes dangerous – is nearly impossible to reach given the small amount of BPA present in can linings (4.5 parts per trillion).Coca-Cola North America Announces 2008 Launch of Sprite Green - BevNET.com". December 17, 2008. Archived from the original on November 28, 2020 . Retrieved March 2, 2017.

Commonly known as BPA, this organic synthetic compound constitutes approximately 80% of epoxy/polymer resins used in soda cans and canned food liners. While this makes a tenacious coating, BPA has a notorious reputation. A popular and easy to merchandise format, drinks cans continue to be a great choice when retailing a range of chilled soft drinks. The problem of the discarded tops was initially solved by the invention of the push-tab. Used primarily on Coors Beer cans in the mid-1970s, the push-tab was a raised circular scored area used in place of the pull-tab. [19] It needed no ring to pull up; instead, the raised aluminum blister was pushed down into the can using one finger. A small unscored section of the tab prevented it from detaching and falling into the can after being pushed in. Push-tabs never gained wide popularity because while they had solved the litter problem of the pull-tab, they created a safety hazard where the person's finger upon pushing the tab into the can was immediately exposed to the sharp edges of the opening. A feature of the push-tab Coors Beer cans was that they had a second, smaller, push-tab at the top as an airflow vent. "Push-tabs" were introduced into Australia from around 1977 and were locally known as "pop-tops", before being replaced later by the Stay-on-tab. [20] The safety and litter problems were eventually solved later in the 1970s with Daniel F. Cudzik's invention of the non-removing "Stay-Tab".US4024980A,Kneusel, Raymond H. P.&Potts, Vinson S.,"Easy opening can end having a closure plug",issued 1977-05-24 Sprite Remix vs. Mountain Dew LiveWire". BevNET. April 1, 2003. Archived from the original on February 25, 2021 . Retrieved November 7, 2013.