However, if the light is not flashing to show that it is ready to pair or connect, your device won’t connect to Wi-Fi. Go to your router’s setting to disable the 5 GHz network bandwidth or ensure that you separate the two network bandwidths so you’ll know which network band you’re connecting to during setup. Due to limitations in the Philips Hue API, you can't currently delete a bulb from the app, nor is there a simple way to reset the bulbs manually.

AISIRER

Also, ensure that your mobile device is close by too as this helps the bulb connect to Wi-Fi faster without interference. Loose connection: Ensure that the bulb is screwed in properly and securely inserted into the socket. Your best option is to force a factory reset on the Hue Bridge, which deletes all lights and scenes, and then start your setup again from scratch. Replacing your lights with connected LEDs is one of the easiest ways to smarten things up around the house.Belkin suggests that you turn on the bulb, then switch it off for a second, before turning it on for 3-4 seconds, repeating the process three times.

AISIRER Alexa Smart Bulb WiFi Light Bulbs E27 Screw, 2 Pack

Choose from 16 million colors and soft white to instantly change the look and atmosphere of your room. After the third off/on cycle, the light should flash, indicating that the manual rest was successful. Brightness can be adjusted from 1% up to 100%, saving up to 80% in energy and lasting up to 30,000 hours.For TP-Link smart bulbs, the process is similar but the number of switches varies depending on whether you want it to remember its settings or a full factory reset. However, it is recommended that you turn off the lights when you are not using them to save energy and extend their life.