Timber surfaces to be treated must be clean, dry, and free from all traces of dust, dirt, wax and grease. The moisture content of the timber must not exceed 18%. This figure will be 14% or lower for interior timbers. New or Bare Timber We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items Tinted colours cannot be cancelled or returned as they have been mixed to your specific requirements. high levels of natural wood extractives or exudates and some softwood can be highly resinous. Resinous deposits should be removed with a scraper. Any remaining residues should be removed using a lint-free cloth dampened with a suitable solvent, frequently changing the face of the cloth. Allow solvent to evaporate fully before overcoating. The use of both eye and hand protection is strongly advised. Where a superficial application of preservative to softwoods and hardwoods is deemed necessary, be sure to only use wood preservatives that do not contain wax or silicone

Sikkens Rubbol Satura Plus is a solvent based, satin finish for exterior and interiors joinery and suitably primed metals and hard plastics. It’s a durable paint with excellent opacity giving even coverage and protection on joinery for up to 5 years. A flexible formula that resists peeling and flaking. Can be used as a two part system with Sikkens Rubbol Primer. Any mould and algae growth must be eradicated using a suitable fungicide or mould and mildew remover Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC during application or drying periods.The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish.

Two coats of Rubbol Satura plus should be applied, allowing a minimum of 18 hours drying time between coats. On new work, General: Ensure the timber surface is suitably prepared, clean and dry, with dust, dirt, wax and grease removed and allowedEnsure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced.