The product has a shelf life of 12 months from the date of manufacture, subject to correct storage conditions. c) With the same measured solution as above, gently wipe the whole area again to remove any remaining mould residues. Wipe inwards from at least a meter past the edge of the visible infestation to catch concentrations of invisible spores which tend to gather at the periphery of the affected area.Leave the surface to dry (this should take approximately One hour) and ideally paint within 7 to 10 days of pre‐treatment. Whilst not specifically labeled as anti mould, Dulux’s Easy Care Bathroom paint works much in the same way as some other paints on this list.

Anti mould paint is more an inhibitor than a straight up fungicide so if you were thinking about painting over mould with anti mould paint, we’d advise against it. Instructions for use Kair Surface Cleaner safety data sheet Kair Mould Eradication additive safety data sheet Thermapaint Anti‐Mould is not a substitute for adequate ventilation and should not be used in areas where excessive or uncontrolled condensation is allowed to accumulate for long periods. Both our standard “Anti-Mould Emulsion Paint” and our “Mould Cure”, create an active-film fungicide on the surface, upon which mould simply cannot grow. The “Thermapaint Anti-Mould” has the additional inclusion of vacuum ceramic micro-beads, which raise the surface temperature of the wall slightly, discouraging the formation of condensation on the painted surface. In that sense it is dual action paint. It is available in 72 natural colours from our Lakes & Fells collection, developed in Cumbria.Carefully open the Mould Eradication Additive container and add the entire contents to the paint (1 x 50ml of Mould Eradication Additive is enough to convert 2.5 litres of standard paint into a mould resisting paint; 2 x 50ml of Mould Eradication Additive is enough to convert 5 litres of paint). Pre -treatment: It is essential to pre-treat infected areas with Kingfisher Mould Cure fungicidal wash. Independent: We will tell you exactly what we think of a product and we would never recommend anything we wouldn't use ourselves.

Dryzone are one of the top brands when it comes to damp protection so if trusted quality is at the top of your list, they might be a good choice for you. It is best to use mould-resistant paint in rooms where damp and condensation build up, for example in the bathroom or in homes with poor ventilation. Any surface defects should be filled before painting with a premium plaster filler e.g. Everbuild TM. All Purpose Filler. Seal any areas that remain powdery with Kingfisher Floor & Wall Seal. Mould and fungus are more common in areas of the home with limited ventilation or that are prone to condensation, like the bathroom. Fortunately, protecting yourbathroom withmould-resistant paint can help keepmould awayfrom yourwalls.Using damp-proof or anti-mould paint can be a cost-effective investment in the long term. These specialised paints create a protective barrier on your walls, preventing costly repairs or mould removal in the future. Browse our range of anti-mould paint anddampseal from leading brands like Ronseal, Zinsserand Polycelltoday. This particular additive comes in a 100ml bottle which is enough to mix with around 5L of paint. And speaking of mixing with paint, you can use this stuff with anything including emulsions, vinyl and if you’re brave enough, silk (sorry silk, but you’re terrible to work with). This of course means you have the freedom to choose your own paint and colour and still get mould resistance.

video title

After adding to your coating, stir very thoroughly before use, especially at the bottom of the can, to disperse the additive throughout the paint / coating. Preferably use a drill / whisk for at least two minutes. Before using this product read the Material Safety Data Sheet which can be obtained at www.kingfisheruk.com or by calling the Kingfisher Technical Dept. Tel: 01229 869 100. Mould is more commonly found in homes and rooms where it is damp and mould-resistant paint prevents the moisture from being absorbed. Many of these specialist paints also have anti-fungal additives designed to keep mould away from walls. It is a good idea to remove mould before you begin painting and it is best to use mould-proof paint to prevent future mould and fungus growth. Unlike most other paints on our list, Dulux has the advantage of providing a lovely soft sheen finish that doesn’t need to be painted over once set. The cool neutral range of colours means you can choose any colour from White Mist to Slate Grey, leaving your bathroom with a modern chic look.

Get Prices for a Professional Decorator Near You Best Anti Mould Paint Overall: Ronseal Anti Mould Paint ELEVATE YOUR SPACE! 10 VIBRANT COLOURS, 2 SIZES, AND MOULD FREE WALLS - Available in a dazzling array of 10 popular colours and 2 convenient sizes, this paint offers both style and substance. Not only does it effectively prevent mould growth, but it also delivers an eye-catching finish that transforms any room. With our premium-grade Mould Paint for Walls and Ceilings, enjoy both an elegant finish with robust protection in your living space. Mould and mildew need two things to grow, a nutrient source and moisture. The nutrient might be plaster, wood, paint or even wallpaper, and the moisture comes from water vapour, which in turn derives from everyday activities including, showering, boiling a kettle, drying clothes and even breathing. Remove the moisture and you remove the problem. Apply the paint in the normal way according to the manufacturer’s instructions. General Product InformationMould and Mildew Remover Prevent mould and mildew with our professional Mould and Mildew remover products.