Clay bar the paint to remove contaminants – this step will make sure there’s nothing bonded to the paint

Hagerty International Limited are authorised and regulated by the Financial Conduct Authority (FCA Firm Reference Number 441417).The first test was on newly-applied paint on our 1984 Land Rover to see if it could bring a shine to our rattle-can finish and blend the old and new coatings. We then tried them on dulled original paint on the same car. If you want to use a cutting compound to remove scratches and swirl marks in the paint, here’s what to do. Bear in mind that this works best on light, shallow scratches that are only in the top clearcoat. Both cutting fluids and pastes will have a lubricating effect. However their performance will depend on the quality of their ingredients. In particular the addition of superior extreme pressure or anti wear additives will greatly influence the effectiveness of either option.

Paintwork on modern cars consists of three layers. The first is the primer, the second is the colour coat, and the final outer layer is the clear protective coat. Minor scratches to car paintwork occur on this outer clear coat and that’s where cutting compound can be useful. If you have had a bottle for years, the smell and colour of the liquid will be very familiar. What might be a surprise is how watery it seemed when you have a ‘fresh’ bottle. The scent, while familiar, is also a little overpowering at times.Monocrystalline Diamond Paste - This is the most common type of diamond paste and contains particles that have a long, flat shape and fewer cutting edges. Monocrystalline diamond paste is ideal for use on flat and even surfaces with fewer edges To see which is the best, we subjected seven cutting pastes to a series of trials, applying them by both hand and using a dual rotary polisher machine fitted with a fresh medium foam cutting pad.

Using the two text fields below, try cutting ( Ctrl+ X) the text in the first box and pasting ( Ctrl+ V) into the second. After cutting and pasting the text, "Example cut text" should only be in the bottom box. Once the above steps are completed, the text is moved into a temporary area called the clipboard. To paste that text, move the cursor to where you want to paste, and do any of the following: Polycrystalline Diamond PasteThe particles in this paste has sharper angles and are more jagged in shape making polycrystalline diamond Paste suitable for polishing more challenging surfaces CUT-IT is a high quality metal lubricant and cutting paste suitable for reaming, tapping, drilling and metal forming and is suitable for all metals.

But it really works well and requires very little effort. Even applying it by hand brought up the old, tired paint with minimal rubbing and using a few passes with the machine created a shine which hadn’t been seen since the car rolled out of the factory. It didn’t make such a noticeable difference to rough rattle can paint or the Nissan’s new clearcoat but the scratches still disappeared easily. It's important to know the three fundamental keyboard shortcuts for Copy, Cut, and Paste included in Windows for decades. Microsoft borrowed these shortcuts from the Mac, which still uses them with the Mac's special Command key instead of Ctrl. Cut: After selecting one or more items, press Ctrl+X, and the information will be copied to the clipboard and removed from the original location. Unlike some of the other products here it doesn’t claim to be anything other than a cutting paste, so you’ll have to add a layer of wax separately to keep the paint protected after using it.We liked the no-nonsense formula, and the price. T-Cut Original