Cabrinha's Modular Spreader bar is dedicated for their Fireball only. Your Fireball control bars will only work with that specific spreader bar. Anchoring-Some roofs may already have a permanent anchor point. If there’s no anchor, you can install a permanent/temporary one. An easy choice for anyone seeking to work safely on a pitched roof. 4. Peakworks Fall Protection Safety Lifeline Rope Ever since ION launched the first harness with a rope slider. I tried it and fell in love with it from the very first session!”

The Guardian Fall Protection Lifeline Assembly is the complete setup for staying safe when working on roofs, especially in high-moisture environments. We will not be held liable for any consequential loss caused by late or failed deliveries. Timed deliveries / Saturday & Sunday deliveries

Deliveries

Do not forget to inspect all the components of the safety rope system. Let a competent, knowledgeable professional do the inspection. Even when employed and installed correctly, roof safety line systems should be considered useless if they are damaged.

Measure out the appropriate distance to allow you to move around safely on the roof without reaching the edge or crashing into the ground if fall may occur. For staying safe on non-horizontal planes, this is one of the best safety ropes. The fact that it comes with all the accessories you’ll need makes it a must-have for all your rooftops tasks. 3. Malta Dynamics Vertical Lifeline Assembly YOKE rope grab is constructed of a long-wearing non-corrosive stainless steel, brass and bronze material for Rope:16mm (5/8″) with Min. Breaking strength: 3600lbs, meets ANSI Z359.1.

Latest News

Most horizontal lifelines incorporate of a wire rope or a synthetic fiber rope anchored and tensioned between two anchor points with intermediate anchor points on longer lengths. The lifeline rope is made with polyester, alloy steel and nylon to be tough enough to work under similarly tough conditions. These materials give it a minimum breaking strength of 5,000 lbs. which is very impressive for any rope or cable. If you don’t need the sliding hook, just grind off the hook, then knot rope at each end of the spreader bar -- no need to drill anything... While this safety rope is touted first as a roof safety device, it can be put to many other uses including personal fall arrest, restraint, swing falls and even rescue. A lifeline rope is basically a device that connects a body support device and anchor point. This means that proper use of a lifeline requires that you have the following items

If you're an arborist, you know the importance of having reliable and efficient equipment. You need gear that can withstand the rigor's work while allowing you to move fluidly and confidently. That's where the Shizll® Rope Slider comes in. Sail slides and slugs may not be the most exciting piece of equipment found on a sailboat. However, they are a very useful bit of kit and can make your life on board a vessel much easier. Sail slugs and slides are most commonly found on the luff or foot of a sail, yet they are also a popular choice for catamaran trampoline attachment points.It’s a question of personal preference and riding style. One of the riders in the GKA Kitesurf World Cup who uses the rope system is Matchu Lopes. As one of the top strapless wave professionals, riding with a conventional harness hook is not an option for him. “I don’t want to use anything else. No way! For maximum performance in the waves you have to use the rope slider!” Is a rope slider bar right for you? The considerations to make when going for a roof safety rope include the following: 1. Quality of Materials For work on a sloping roof, users should always face the ridge, which means they should use the chest attachment point of the harness. At only 4 lbs. of weight, this rope has a maximum breaking strength of 6,000 lbs. which is quite impressive. For a rope tested by recognized safety standards bodies, the Peakworks safety line is what you need the next time you want to repair the roof or carry out any other task above the ground.

I have a hook on the option but I don't mind trying a rope. I actually have an old hammerhead that the hook broke off of and was toying with the idea of converting it to a slider. Any good How-to's out there that you could refer me to? I was thinking of drilling a hole near each side of the bar and running rope through it but I'm worried that the rope will get cut by the holes, even if I file them out nicely. I've already had that hook break off on me during a jump and that wasn't fun... almost took my nose off. The length of the rope will also depend on the height of the roof, the anchor and other aspects. While you can find shorter ropes, go for one with about 50 feet of length or more for use in various other scenarios. 3. Weight CapacityThis SLR comes with a 3/16” non-fraying galvanized steel cable that easily retracts into its heavy duty, protective aluminum housing, and a textured grip for easy handling.