Puller plier: These are essentially a standard pair of pliers with the addition of a top rounded “roll bar” for prying a nail out after the plier’s jaws have grabbed the nail head. These are useful for large nails with partially exposed heads that you want to remove with minimal damage to the underlying wood. But, they do tend to damage the wood more than pincer pliers. Pincer plier: These pliers are specifically for nail removal. The nail is grabbed in the rounded jaw and then pried out by rolling the rounded head of the pliers sideways towards the wood. A pincer is compact and portable and grabs nails that a hammer’s claw can’t, like the heads of finish nails. Use them in confined spaces where a claw hammer can’t reach or maneuver. They also cause minimal damage to the underlying wood. Some nail pullers can pull both the staples and nails with perfection. So yes. Does the length of a nail puller matter?

Whether you’re a professional or a DIYer, there are times when you’ll want to pull a nail safely and efficiently from the wood it’s anchored to. The best nail puller tools help right the wrongs made during construction projects, ease deconstruction, and make wooden boards yours to reclaim. Out of all the options we reviewed, the Crescent 56 Nail Puller is the best for most customers. They are high-quality and not very expensive, either. They can remove most nails quite easily.The most common type of nail puller is the claw hammer. This type of nail puller has two curved claws that are used to grasp the head of the nail. Another type of nail puller is the pincer nail puller, which has two flat pincers that clamp down on the sides of the nail. Both of these types of nail pullers are effective at removing nails, but they can also damage the surrounding wood. Make a list of nail pullers that meet those criteria, then choose the least expensive one, which will provide the best value for your money since it provides a great experience at the lowest price. The head is forged for exact durability, and the rubber grips make them far more comfortable to use the other models. The dual handles provide you with complete control over the nail as you’re pulling them out. You can easily grip, roll, and tug on them to remove them as efficiently as possible. Compact nail removers come in two varieties. The first is plier-style, which excels in removing nails from the top down, so it doesn’t need a lot of horizontal clearance to work. The second is lever-style, which needs a lot of horizontal clearance but needs as little as an inch or two in height to work. Which Nail Puller Is Right for You? It’s a common problem faced by so many workers. We would recommend you consider the nature of the job and the specifications of the tool you are going to use.

Most probably the material. There are nail pullers that seem quite expensive, but they worth their cost because of their reliable and durable nature. It matters a lot if you are a professional worker. for small, tight and hard places, only those tools can work better that are designed to work in such conditions.The same goes for the tools designed for large wide and open places. The tool works best only when it is applied to a suitable place of action. Does all the nail pullers damage the wood?

Some could be used as hammers, nail pryers, nail cutters, scrapers, and pullers at the same time. What makes a nail puller durable? Air Punch: Air punches are essentially pneumatic nail guns in reverse. Powered by compressed air, they eject a small metal rod from the nose of the gun to “punch” the head of the nail all the way through the board. Instead of using manual force as you would with a handheld nail puller, all you have to do to operate an air punch is slip the nose of the punch over the nail and pull the trigger. These save a lot of time and effort when you’re trying to denail a large number of wooden boards to be reclaimed, but they aren’t as useful for removing fastened boards that require pulling the nail head out—not through— the wood. Well, an exact answer to this question is that the one which you can use with ease and perfection and the one suitable for your job is the ideal one for you. How to determine that the tool is suitable for the job? Meet Max, the founder and lead writer of our home improvement blog. He is a seasoned home renovation and design expert with over 8 years of experience in the industry.Max has a passion for creating beautiful and functional living spaces and is dedicated to helping homeowners and DIY enthusiasts achieve their home improvement goals. He has worked on a wide range of projects, from small updates to full-scale renovations, and has a wealth of knowledge and experience to share. An honest reply to that is yes. all the nail pullers damage the wood to some extent. But there are nail pullers that cause minimal damage to the wood and work exceptionally well. What other works can be done using a nail puller? Cat’s paw: The cat’s paw is a pry bar designed specifically for pulling nails. It has two claws: one aligned with the tool’s shaft on one end; the other set at a 90-degree angle on the other end. As opposed to pincers, cat’s paws usually damage the wood the nail is anchored to in the process of removal. For that reason, cat’s paws are best for rough framing and demolition jobs where aesthetics aren’t the primary concern. Well, there are no limitations to the human mind’s creativity. One can use it for many other purposes. But technically, some nail pullers are designed to perform multi-function tasks.