A brushless electronic motor runs more efficiently than brushed types. This can help reduce the tool's energy consumption.

Another reason users will love this new model is that it’s approximately 14% smaller than the DHP481. Measuring just 178 x 81 x 248mm, it’s more likely to fit into compact spaces, thanks to the optimised gear assembly design. Impacts Per Minute and No-Load Speed Specifications such as Impacts Per Minute and No-Load Speed remain equal to those of the DHP481, with a max of 31,500 ipm and a No Load max speed of 2,100 rpm. Some users don’t appreciate an RPM over 2,000, as when using larger drill bits, the drill struggles. With a max RPM of 2,100 on the highest setting, the option of a lower gear and thus a lower RPM of up to 550 rotations per minute is welcome. Users have regularly favoured higher RPMs over the years, possibly for no other reason than that they look good on paper! The Makita DHP486RTJ 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications. The Makita DHP486Z 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications. mechanical gears with an all-metal construction and metal housing for high durability and smooth power transfer in high load applicationsNewly-designed motor and gear ratio achieves more power and increases performance in continuous heavy-duty applications If you’re concerned about sound, this device produces 84 dB(A) at sound pressure level and 94 dB(A) at sound power level. The noise k factor is 3dB(A). All of which is a slight improvement versus its predecessor. All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.

Something else we love about the new model is the fact that it features XPT technology. XPT is a protective seal featured inside the drill, making it more resistant to dust and water and protecting the critical components inside. Because of this, people can use the drill outdoors or in harsh environments. LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous modelHigh Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation. Masina de gaurit si insurubat cu percutie DHP486Z face parte din categoria de scule elctrice profesionale cu acumulator Makita. Acet model este echipat cu motor fara perii pentru productivitate si randament ridicate, mandrina rapida ce permite schimbarea usoara a accesoriilor si maner cauciucat moale pentru o prindere sigura si confort ridicat in utilizare. Alte caracteristici ale masini de gaurit si insurubat Makita DHP486Z: