This might be easier using a shower or even a hose. But you should exercise caution as the metal surface could cause injury. We recommend wearing gloves to protect your hands.

If you select the wrong program, it could lead to poor drying results. Tumble dryer programs have two different types of programs which are; The moisture sensor comprises two parallel metal strips usually located just inside the tumble dryer around the door area. The automatic drying cycles should not be selected for clothing that is almost dry. Tumble Dryer Not Heating Up Clean out the condenser, too; this is the small, easily accessible metal tumble dryer box that looks like an accordion. Condensers can be quite hard to clean, but give them a good rinse, and you should be able to dislodge any debris from them. Some people recommend using a hosepipe. When a condenser dryer extracts water from clothes, it pumps it through the condenser and into the tray. Over time, these pumps can break down and fail.To remove this unwanted layer, wipe the moisture sensor with white vinegar or rubbing alcohol. Laundry Too Dry Looking for more information about tumble dryer repairs? Find out what to do if a dryer is not heating up or if it stops spinning. The likely result would be the machine would stop prematurely because the moisture sensor senses that there are no wet clothes that need to be dried. Wrong Program Selected

Once you have cleaned the condensing unit, reach into the slot the condenser fits in and clean this area out. Find the channel that leads from the dryer to the condenser and clean it well.If the heater has stopped working on your tumble dryer, it cannot extract moisture from your laundry. Which in turn would prevent the water tank from collecting any water. You should then remove any build up of dirt, lint, etc from the slot that the condenser fits into. Dirty Moisture Sensor You should open the filter and remove as much fluff as possible after every use. You can even clear the lint from the filter housing as well using a vacuum cleaner. Condenser Tray Misplaced