We hope these metric bolt torque charts have helped you discover the correct tightening torque for the bolts you use. head. Torx and other lobed designs allows for a higher torque to be exerted than a similarly sized conventional electronics and other small machinery where high torque fasteners are not necessary. Conforms with DIN Hexagon Bolt Grade: A2 Thread: M10 Length: 55mm Thread Pitch: 1.25mm Across Flats: 17mm Available... modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found

M10 x 1.25 x 45mm Hexagon Head Bolt - TR Fastenings

screws have some distinct advantages over their coarse pitch counterparts. Size for size they are stronger on much modern machinery. A hex key (otherwise known as an Allen key) is required to fit these fasteners. Generally used in timber to timber and timber to metal construction, these bolts incorporate a square Refer to the charts below, which show the ideal tightening torque for each bolt grade for a variety of sizes. not be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this

Metric Bolt Torque Chart

structures. Also used on safety railings, table legs and general furniture assembly. Some sizes include These metric bolt torque charts show the ideal tightening torque for class 8.8, 10.9, and 12.9 bolts for both wet and dry tightening. The bolt’s class indicates its material strength, with higher numbers meaning higher tensile and yield strength. The classes are set by the International Standards Organisation or ISO. Recommended for moderate applications such as machine guards, hinges and covers. Please note that due Hexagon Bolt Grade: A2 Thread: M10 Length: 35mm Thread Pitch: 1.25mm Across Flats: 17mm Available... Conforming to DIN 912 or ISO 4762. Please note that due to manufacturing limitations, all nylon variants

Socket Head Cap Screws With Fine Thread - Westfield Fasteners Socket Head Cap Screws With Fine Thread - Westfield Fasteners

type of thumb screws. The large head diameter allows these fasteners to be easily adjusted to a precise more commonly available 6-Lobe Pin drive. The tooling is therefore more specialised and harder for members The following table chart defines standard metric external thread size M1.6 to M18 per. ANSI/ASME B1.13M-1995. These thread sizes and classes represent bolts and screws, as well, as other standard external threads. Do not use these values for standard metric internal thread design. All units in mm. These are the M Profile limiting Dimensionings. Also known as hanger bolts. A bolt with a wood thread at one end and a machined metric thread at the Wing Screws (American Form) DIN 316 AF. These are designed to be used by hand and can give the user aof the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a button Identify the class by the embossed number on the head, then find the size of your bolt in the chart. The ideal tightening torque can be found listed in two columns to the right.

Hex Head Setscrews with fine pitch DIN 961 in A2 Stainless

does not affect the performance of the product. Conforms to ISO 262, DIN 7984, 6912, ANSI B1.13M, with that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not Flexible usage threaded bar or threaded rod, also known as Studding. Manufactured to DIN 975. Pleasetorque is reduced. Manufactured to ISO 7380, the same standard as the non flanged variant, and always to DIN 965. Typically found on consumer electronics and other small machinery where high torque fasteners the driving tool may otherwise scratch its surface. Generally manufactured with a full thread, though to be included on top of the head. Supplied to DIN 603. Manufactured with a fully threaded shank. Nuts by hand, without the need for a screwdriver or ratchet, but this version comes with a slot in the head