Single threaded: pull the thread through the eye so that the needle is a few inches from the end. You can then cut the length of thread that you like. You will knot the longer single thread however you like and begin sewing. Pincushion & Pins - You'll pin most everything you sew to keep the fabrics from slipping. A pincushion keeps them neat and tidy.

The Show Guide provides a full colour floor plan, list of exhibitors, workshop timetables, features andgalleries. Use the Normal Fill, Column, Satin line etc. digitizing tools to create controlled, detailed designs. Everything digitized can be easily edited and changed.

Collection

You'll want to trim the end of the thread that will be put through the eye with very sharp scissors. This will give it a clean edge and help you ease it through the eye of the needle. Now, thread your needle - I chose double threaded for this one because it makes it more visible! Double threading your needle will make a stronger seam, but choose single threaded if you want the stitches to be almost invisible. I'm also using purple thread, though typically you will use thread to match your fabric so it blends in. :) Starting off, Stitch & Sew Studio possesses the full editing and lettering capability of Editor Plus, and adds further tools in both areas, including TrueType font importation and condensed level editing of digitized artwork. Put your needle through that loop and pull so the stitch becomes a 90 degree angle. It's easier in the pictures. But you'll continue with the diagonal stitching and pulling until you're done.

For the basting stitch: simply make longer stitches, between 1/4" and 1/2" in length! These are the pink stitches in the first picture. :D You'll want to start by threading your needle in one of the two ways I've taught you. Knot the thread end(s). To practice slip stitch you'll want to cut out a small square of fabric. Fold it in half and press. Open, and then fold each side into the center line. Press. Fold down center line. You'll have something that looks just like the piece of fabric I'm using. Digitizers will appreciate the time saved with the fast manual stitch transition mode for fine detail and pathing, as well as the ability to work at the machine code level for better control of the sewout.

General Features

Double threaded: pull the thread through the eye and double it up. The end that's threaded through the eye will meet up with the thread from the spool. This way you'll have two tail ends. You'll knot these together and then sew with the doubled up thread. Make sure you're holding the shorter bit of thread close to the needle while sewing - otherwise, it will slip through the eye and you'll have to keep rethreading it! Heard Island and McDonald Islands; Bouvet Island; Man Island (Indonesia); Svalbard and Jan Mayen - due to extensive cost implications and limited requirement, we are unable to offer delivery to these places. At the end, take the needle and move it to the right of the last vertical line the thread forms. Bring it up through the fabric and form a loop like we've been doing. Put the needle through the loop a couple times and viola, a knot! Yay! Everything digitized can be easily edited and changed. 100 high quality fonts & 30 Lettering templates