Smoke Alarms: To offer high protection FireAngel advise a smoke alarm within the circulation area of each floor of the property, as well as within the main habitable areas such as bedrooms and living room. It’s important to remember that the sensors in all smoke alarms deteriorate after time, at FireAngel we recommend that smoke alarms are replaced every 10 years. Ability to be built into hybrid networks of interlinked mains and/or battery powered devices, and when one sounds, they all sound Devices with multi-sensor technology can log whether they have gone into a ‘Thermoptek’ sensing state – meaning whether they’ve enhanced their sensitivity by detecting temperature rise – and can inform the FRS of the ferocity of the fire. Where should you install a Thermoptek multi-sensor smoke alarm?

Smart silence – Allows the alarm to be silenced for up to 10 minutes in the event of a known false alarm. During this time if additional smoke is detected then the alarm will sound

Compare Similar Products to Thermoptek Toast Proof Smoke Alarm - FireAngel ST-625

Interlinking alarms with locate feature – Silence all but the initiating alarm in a network by pressing the test button All our alarms are subject to third-party testing and certification, giving you peace of mind protection. Our FA6720-R Heat Alarm is certified to the British Standard BS5446.

When almost 50% of fires start in the kitchen, it’s paramount you protect this room and are alerted at the first signs of danger. From April 2022, FireAngel is launching a new range of optical sensor smoke and Thermistor sensor heat alarms. These alarms feature an array of exciting features and will be replacing a few of our current units. Heat Alarms (Kitchen Alarms): Heat alarms are the only alarm suitable for use within the kitchen as they’re not affected by cooking fumes like traditional smoke alarms. Over 60 Percent of fires start in the kitchen, with cooking and faulty white goods (fridges and tumble driers) being the main causes. FireAngel recommend a heat alarm is fitted in the kitchen, but you can also fit additional heat alarms in the garage and loft to protect these areas.Offering additional protection during the night, the extra bright light (available only with FA6611-R) offers a powerful visual beam to guide your way to safety – making it perfect for landings, hallways and bedrooms. FireAngel heat alarms have been specifically designed for areas with fumes and high humidity such as kitchens, where cooking fumes are present, and attics or garages where there is lots of dust. When paired with FireAngel Predict®, this data is working to transform how the Service provide and manage fire safety for vulnerable residents. Multi-Sensor technology: Extra fire safety features

Updates made to BS 5839-6:2019 recommends the installation of multi-sensor smoke alarm technology throughout a property. Three benefits to using Thermoptek multi-sensor alarm technology Replace your end of life FireAngel HT-630 heat alarm with the FA6720-R to continue to be alerted to fires that may start in your kitchen, attic or garage.Our FA6611-R and FA6615-R alarms will require a new MP7 baseplate installed when replacing any end of life alarms. Key features of our new range Looking for a FireAngel ST-622 or ST-620 smoke alarm replacement? With the FA6620-R, you can replace your end of life alarm without requiring a new base plate or leaving unsightly holes in your ceiling. The advice below is purely provided for ‘best practice’ and should not be used independently. Please note, these alarms are not suitable for homes in Scotland under the new Fire & CO regulations. All optical smoke alarms sold in the UK need to comply to the European standard BS EN 14604 and must pass five live fire tests which measure how an alarm performs in different types of smoke.

An audible Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. With the Pro Connected app, experience complete control and peace of mind protection. Use the app to test and silence alarms without having to reach a ceiling mounted test button. Standard optical smoke alarms detect a fire by sending out a beam of light, using a receiver to monitor the beam. Any smoke will flow into an optical chamber within the alarm, causing the beam of light to hit the smoke and scatter the light rays. Our new heat alarm features Thermistor heat sensing technology to ensure you’re alerted to fires without the false reactions to cooking fumes. For faster detection, search for FireAngel Thermistek. We’ve made testing at home all the easier, with a large, central test button and the ability to easily silence known false alarms to 10-minutes giving you time to waft away the smell of burnt toast and return to peace and quiet once again.

However, a secondary product of a fast-flaming fire is heat. This is where Thermoptek multi-sensor technology provides enhanced detection. What is a Thermoptek smoke alarm? Noise identification – When interlinked, each unit will sound a different sound pattern depending on the triggering alarm whether smoke/heat or carbon monoxide Noise identification – When interlinked, each unit will sound a different sound pattern depending on the triggering alarm whether smoke, heat or carbon monoxide With an extra bright light beam and loud, clear alarm, the FA6611-R will ensure you and your family are alerted to danger and guided to safety.