So TLDR, the LG 32GN600-B is a flat 1440p VA 165 Hertz panel, having excellent low input lag, and 1 millisecond response with 5 Gray to Gray. The SDR colors are outstanding out of the box, and perfect after calibration. Supporting FreeSync Premium and working with G-Sync over DisplayPort only, the menu is snappy, and the 8 mm pixel to air is pretty good. For gaming, the Response Time or Overdrive setting of Faster does best at 165Hz, and Normal does best at 60 Hertz. Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality. Au final, je dirais que la 2K 32 pouces, c'est vraiment le pied. Que ce soit en jeu, en bureautique ou en vidéo. Par contre je me demande si je n'aurais pas préféré sacrifier la fréquence d'image pour du vrai HDR, étant donné que ce qu'on gagne en fluidité, on le perd en netteté de mouvement (voir vidéo). While HDR10 handling is advertised for this LG 32GN600-B, the reality is that monitors deliver SDR at the cd/m2 or nits the panel is rated for, and then boost to get the added brightness for HDR, usually by 100 nits or more. LG on the other hand, lowers overall brightness and shows full white just a bit above original brightness. This shows LG’s incompetence with HDR implementation in this monitor, so don’t buy this if one of the primary reasons is watching HDR.

For office work the pixel pitch and font size is identical to a 24” 1080p resolution display which is comfortable and easy to use, without being to large that it loses clarity. It might not look quite as sharp as a 27” 1440p display, but it’s perfectly usable and many people may even prefer it. Movies and HDR Clarified text throughout as part of Test Bench 1.2, including adding text to the Console Compatibility boxes. DCI P3 is a color space, introduced in 2007 by the SMPTE. It is used in digital cinema and has a much wider gamut than the sRGB. Calibration and profiling can of course produce excellent results if you have a suitable calibration device and appropriate software. Our results are included above. You can see the recommended OSD settings above although very few changes are needed really there, and the main corrections are taken care of at the profile level. If you want you can also try our calibrated ICC profile out. Gaming The net result of this is that the improvements you get normally in motion clarity from that extra 45Hz refresh rate are basically wiped out by the slower response times and their failure to keep up. We have captured some pursuit camera photos which show that actually the 120Hz mode probably looks a bit better overall in practice as there is none of this added smearing because the response times can’t keep up with the frame rate.This is kinda like getting to drive a sports car, you’re all excited about trying it out, you open the door and have to sit on a milk crate and that’s your experience. We re-calibrated on PS4 three times, getting the same result each time. Usually with HDR, there’s that “ooooh” when it looks good, but HDR has really poor color volume here from the incomplete DCI-P3 and Rec. 2020 color gamuts. So, don’t buy this for HDR. Furthermore, the model up from this, the LG 32GP850-B you’d figure with its Nano IPS panel would deliver a much improved HDR experience, except the panel hits 430 cd/m2 across the board, and a competing VA panel, can hit 450, delivering a far more competent HDR experience and brightness, and matching this model’s price.

Let’s get into the LG 32GN600-B’s menus, up and down control brightness, left and right control volume for the headphone out, not for the non-existent speakers. Straight press gives you Power Off, Input, Menu and Game Mode, which gives you access to 4 out of the 7 profiles, kind of weird. Input gives an easy toggle…and Power Off works immediately for a 2-step power off.The most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively. At the maximum refresh rate of the screen we will also include our familiar more detailed response time measurements, which includes a wider range of transition measurements as well as some analysis of things like the refresh rate compliance. This identifies how many of the measured pixel transitions were fast enough to keep up with the frame rate of the screen. Ideally you’d want pixel response times to be consistently and reliably shorter than this refresh rate cycle, otherwise if they are slower it can lead to additional smearing and blurring on moving content. And for camera usage, the LG 32GN600-B does accept 4K at 24 frames, popping up a dialog to tell you about the resolution mismatch which we really appreciate. This is great for reviewing footage in an emergency, we tested this with a Lumix G9. le trésor de smaug n'est pas éclatant, mais plutôt terne. J'avais deux écrans qui diffusait le même films, celui de l'ordi portable (IPS) et ce 32 pouces: la différence m'a brisé le cœur. Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.

The ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10. Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc. Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.Updated to Test Bench 1.2, resulting in changes to the results and scores with the Response Time and Input Lag. Added tests for Console Compatibility and macOS compatibility and made minor changes to other tests, which you can see in our Changelog.