Smooth all of the saw cuts up to the pattern lines using an oscillating spindle sander or sanding drums in a drill press.

Convertible Step Stool Chair | Woodworking Project Plan | Convertible Step Stool Chair | Woodworking

Figure 5: Transfer the spline and step dado locations from the first upper and lower side pieces to your tracings for the second set of matching parts. Don’t be fooled – this seemingly flimsy contraption is made of solid wood and can hold the average person’s body weight with no problem.This Benjamin Franklin Ladder Chair is assembled in 4 main sections: front legs/rails, front steps/cleats and front seat, back legs/rails and stiles, middle legs and cleats, steps/seat and back seat rails. Re-assemble the back and sides, and use the pilot holes as guides for drilling countersunk screw holes through the outside faces of the sides and into the back. Next, head to your router table and template-rout the upper and lower side pieces to match one another (see Figure 7). Figure 3: After drilling the corners of the inside cutouts round, cut away the rest of the waste with your jigsaw. This clever stepladder chair has such an elegant appearance that I almost forgot it was a step stool!

Step Ladders | Homebase Step Ladders | Homebase

When all the corners are drilled to shape, remove the rest of the waste for the inside cutouts with a jigsaw. Remember to rout clockwise for the inside cutouts and counterclockwise for the outer edges to avoid making climb cuts (see Figure 8). If you would like to change your settings or withdraw consent at any time, the link to do so is in our privacy policy accessible from our home page.Non-slip pads under each leg keep the stool firmly in place and also protect your floors from scratches. Watch the video here or on our YouTube channel, and be sure to subscribe to see more DIY videos each week!