This is the Device Manager window’s command. Choose your PS4 from the long list of available drivers. The PS4 controller blinking white light issue might be caused by an unstable and intermittent Bluetooth connection. The Bluetooth connection can be jumpstarted using USB cords. The USB cord provides a wired connection, which is subsequently used to connect to the system through Bluetooth. In this section, we’ll show you how to fix the PS4 controller flashing white error that occurs when the controller is unable to connect to the console. There might be other minor reasons that rarely happen and only specialists are aware of. We’ll not go too technical and we’ll try to make this as simple as possible thus we’ll settle for two reasons that are the most common. Fixing The PS4 Controller Flashing White Light The PS4 controller can be fixed by updating its driver files on a PC. The PS4 controller driver, like any other driver, can become damaged or obsolete, causing the system to malfunction. When you attach the PS4 controller to the computer, the controller is recognized as a device. This way, you can update it just like any other driver on your computer.

Select Bluetooth devices in the Devices settings. In this window, only the spare controller will be visible. Turn off your PlayStation 4. The indicator will blink a few times after pressing the power button on the console’s front panel.

Intuitive design. Outstanding comfort.

If you didn’t already know, the PlayStation 4 offers a safe mode for updating software and managing databases. You can put the PS4 into safe mode if your controller is flashing white or not working. You should be aware that the present setup will be lost before you begin. Press the Windows key and the R key to launch the Run tool, then type the following command: “ devmgmt.msc“ Before you begin this method of controller repair, attach the spare controller to the PS4 and use it to get the blinking one working. The ways to resolve this issue with a functional controller are as follows: Many PS4 controller issues can be resolved by resetting the controller. You can resolve difficulties such as the blinking light, Bluetooth connectivity faults, syncing problems, and others.

All you have to do now is press the PS button and the Share button on your controller at the same time and wait for the PS4 to switch on. This should resolve the issue, and you should be able to connect to the console properly after that and get rid of the PS4 controller white light issue. 8. Use a different controller to change the configuration. Now, it should be possible for the PS4 system to detect the controller and that the PS4 controller white light issue is gone. If not, continue with implementing other methods. 7. Press the PS and Share buttons at the same time. Now leave the controller disconnected from power for around 5 minutes, then reconnect the battery to it. 3. Reset the analog controller on your PS4. Take the flashing controller and press and hold the PS and Share buttons until the light bar flashes twice every second.Using an unfolded paperclip, or a sim card opener from your phone push the button inside of the hole. Once you’ve reset the computer, you’ll need to link the controller with the console again via the USB cord. One of the efficient methods to fix issues on the PS4 controller is to totally disconnect it from power and remove its battery. This will drain any static electricity remanents out of the PS4 controller components that might be causing this problem. PS4 users can substitute a spare controller for the one that is flashing white. They can also use a different controller to modify some settings that will stop the blinking lights from happening.