NEW! A shallow undercut along the square's mating edge makes it less sensitive to minor dings and debris along the outer edge of the guide rail Within this product range you will find a variety of different Guide Rails including the Guide Rails of up to 5000mm, Guide Rails with rows of holes, as well as a vast range of accessories and consumable materials. Hybrid design fits perfectly to all lengths of Festool, Makita, Triton, Evolution, Milwaukee (latest red version), Mafell, Bosch and DeWalt profile guide rails. Threaded M6 accessory mounting holes enable connection to the TSO Parallel Guide System and Angle Accessory Single-piece design that self-squares to 90° with no adjustments needed (and therefore, no points of failure in the future)

With production secured, Wim also took the opportunity to redesign the rail square – developing the second generation ‘hybrid’ model, which was expected to be available from April 2021. The latest Taiga Hybrid Rail Square is compatible with most guide rail profiles available on the market – fitting perfectly to all lengths of Festool, Makita, Triton, Evolution, Mafell, Bosch, and even the DeWalt profile guide rails.NEW! Rapid attachment feature: simply insert the square at any point along the guide rail and clamp it in place—no need to slide it into the guide rail from one of the ends or remove hose deflectors, clamps, or other accessories occupying the guide rail T-slot People are only really going to comment on what they’ve got as I double many people will have bought/used more than one option That out of the way, where are you located? Asking because at times a second set of eyes helps. If you're near Colorado Springs or Northwest Indiana you're welcome to come by the shops and we'll see if we can help.

I've run into this before (could have been the same rail,it has now been sprayed with red paint), the guys had not. They thought it was them. It wasn't.I used to have a little Triton square which was ok but obviously nowhere near the same build quality.

No need to measure and mark both ends, no clamping required and no wasted material from misaligned cuts! What sets our rail squares apart is our commitment to accuracy. Each square is meticulously calibrated on our CMM machine, ensuring 100 percent precision. You’ll receive a CMM report with every square, guaranteeing the utmost quality and accuracy for your woodworking needs. The GRS-16 PE is much more than a guide rail square; it's the foundation of a broader system of TSO Products designed for interoperability. In fact, the GRS-16 PE serves as a connection method for the TSO Parallel Guide System. Once connected, you can repeatedly square and parallel rip multiple workpieces. Festool MFT/3 Compatibility

You might also be interested in...

Accessory Mounting Holes: Tapped for M6 threads for compatibility with TSO Parallel Guide System and Angle Accessory

Our rail squares are compatible with a wide range of brands, including Festool, Mafell, Milwaukee, Bosch, Makita, Flex, Triton, and many more, making them suitable for 99 percent of guide rails. Just before I left another cutting table was made. This meant more rails added to the mix. Well, one of them (a 1080) is off at the entry end by a few thousanths of and inch. Not a big deal when marking and droping the rail, but a nightmare when using the TSO square. Two squares fit in a Systainer—see our Systainer Foam Insert and limited edition TSO Blue Systainer3 M 112Consequently, the slightest vibration such as using the saw, or putting the rail against the wall temporarily between cuts, will very often cause them to come loose and the rail can slide off onto the floor, or sometimes I’m all set up ready to make the cut and I notice one is loose.