Using the Core XY structure, two parallel motors run with coordinated operation, faster speed, and higher precision. Creality 3D’s Ender 7 uses the Bowden system with a metal dual gear extruder that allows stable and consistent equal feeding. The extruder also has double part cooling for fast and eco-friendly cooling. A customized nozzle is equipped with superior high volume flow for high-quality accelerated prints. Thanks to the core-XY structure, the print bed can move up and down the Z-axis which significantly improves the print quality of higher objects. The core-XY structure adds immense power and will also significantly boost the print speed. So as mentioned before, this is my first time operating a 3D printer. The main things to convey is that I can’t compare and contrast with other consumer models (as I haven’t used anything else), and that all of the info in this review is based on figuring it out as I went along. There are a myriad of resources online where you can troubleshoot issues, find recommendations, and browse files that are ready to print and I spent a good deal of time doing just that. I definitely know more now than I did at the start, and there seems to be no bottom to how far down the rabbit hole you can go. I did run into a couple of issues while testing the machine. As I mentioned before, the Dragon failed about 14 hours into the 15 hour print. It left this beautiful piece of spaghetti though. What I believe happened was the cable protector for the hotend came loose during the print. During assembly, the protector is just shoved into a hole in the top of the printer. The protector came loose, allowing the cables to fall into the gantry, and it must have pushed the hotend causing it to continue printing off the side. A spectacular failure to look at. I’ll probably end up printing a retaining clip to help ensure it doesn’t happen again.

Moving down to the base, we can see the 4 inch touchscreen display. The firmware makes it easy to adjust settings, monitor prints, load filament, and even helps with bed leveling by moving the hotend to the four corners. The firmware also includes Powerloss Print Recovery, so if the machine loses power mid-print, it can remember where it left off, and prompt you to resume printing once power is restored. There will be a slight seam, but a seam is better than losing a multi-day print due to power loss.With that out of the way, let’s talk about the specs. The Ender-7 is a filament based 3D printer from Creality. It has a build volume of 220 millimeters by 220 millimeters by 300 millimeters. It comes with a 0.4 millimeters nozzle, and uses 1.75 millimeters filament fed by a bowden extruder. Q&A: Some customers may want to know what to do if the Teflon tube is curled at the extruded end of the machine? Overall the print quality is amazing. This God Of Wealth gcode was included on the micro-SD card, and was the very first print I printed after assembly. And it turned out great; the surfaces are smooth, the layers are consistent, and the included white PLA printed just fine. The Ender-7 is able to handle 0.1 millimeters to 0.3 millimeters layer heights with no issues. At reasonable speeds, it prints near the top of the class quality-wise. It has a Core-XY gantry, which means instead of there being one motor for the X axis, and one motor for the Y axis, instead it has an intricate belt loop where two motors work together to move the hotend in the X and Y directions. This allows the motors to be stationary, and use the torque of both motors to control the hotend position. The gantry also uses linear rails for the x and y axis. These design decisions are what allows for the 250 millimeters per second print speeds.

Cloud Storage Note: Extract to a folder that is NOT in a “cloud” storage folder. Many users have reported issues using the firmware when the folder is in a cloud storage folder. A new product always is released during the annual anniversary celebrations of Creality. So, the Creality Ender-7 3d printer is our latest high-end Ender series product. Continuation of the Ender-6 high-speed printing function in Ender-7, Continue to work on more speed breakthroughs. Different printers/boards will have different .bin file names but they will all end in the .bin file extension.With the Ender 7, Creality is boasting a staggeringly high 250 mm/s print speed while claiming to maintain the same printing quality. png => essential changes for klipper firmware build from make menuconfig (u could set these manually ore replace .config file mentioned above) A: The Ender 7 does not come with an automatic bed leveling function. The printhead can be sent to five different points on the bed, though, and you will have to adjust the bed via the knobs yourself. From the article on All3DP.com, there are 3 similar products: Creality Ender 6, Prusa MK3S+, and Two Trees Sapphire Pro If you aren’t versed in 3D CAD and building your own files, you’ll want to head on over to Thingiverse or one of the many other places to browse and acquire files for something you want to print.

PROPERTIES Build volume: 250 x 250 x 300 mm Feeder system: Bowden drive Print head: Single nozzle Nozzle size: 0.4 mm Max. hot end temperature: 260 ℃ Max. heated bed temperature: 100 ℃ Print bed material: Coated glass Frame: Aluminum Bed leveling: Manual Connectivity: SD card, USB cable Print recovery: Yes Filament sensor: Yes Camera: No As a 3D printer that focuses on printing speed, the ender7 does accomplish its goals in some ways. It produces quality prints and is reliable, easy to use, quiet and versatile. It will fit in just as well at design studios, prototyping companies, and architectural firms. The full metal extruder with double drive gear ensures a strong grip, greater and more even extrusion force and a continuous and stable feed.Discover efficient and speedy 3D printing with the Ender 7 3D printer by Creality 3D. Creality 3D has designed a core-XY structure 3D printer kit that you can easily assemble to produce extremely accurate models and parts. The Ender 7 is compatible with the materials: PLA filament, PETG filament, and ABS filament. The faster speed promised by Creality is elusive. The Ender 7 will print slower on the initial layers along with some infill or technical areas. Take a look at this video showing just that. The extruder fan allows a more stable feed. High-speed material double fans are designed in a butterfly-shaped wing channel. Compared to a single fan, two fans increase the total air volume by 169%, providing rapid cooling for high-speed printing models. Maintaining the minimalist aesthetic seen in previous Ender machines, the Ender-7 features the familiar dual support frame that continues to provide print platform stability.