To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1. Concrete paint comes in just about any color. Most manufacturers have a set of standard colors ranging from 30 to 40 options. Some offer custom color matching services as well. Using a soft broom, or hand brush for smaller areas, work Sika FastFix All Weatherinto the joints. Make sure each joint is completely filled and the material well compressed.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Fully penetrating concrete sealer – Densifier

As a dust proofer for new and old concrete cement based floors, screeds and paving in factories, garages and domestic dwellings. Topical coatings – these sealers are typically higher solids, 2 component, reaction resin based sealers. Fully penetrating concrete sealer – Densifier In this article I will discuss clear concrete sealers. We will classify coloured sealers as “concrete coatings”. They still seal the concrete but we will confuse the matter. For paint to adhere properly, the concrete should also be dry and free of trapped moisture. An easy way to test the moisture content of concrete before painting is to duct tape an 18-inch square of clear plastic onto the surface and leave it in place for 24 hours. If condensation collects under the plastic after that time, the concrete is too damp for paint application and needs additional drying time. Learn more about reducing bond failures caused by moisture-vapor transmission. ARE CONCRETE PAINTS SLIP-RESISTANT?

None of these terms affect your legal rights and these are not diminished in any way. If any term is held to be invalid under any applicable statute or rule of law, that term is automatically omitted from the terms to minimum extent necessary to comply with the law and without affecting the validity or enforceability of the remainder. Residue could be harmful to children, animals or the environment. Replace lid and dispose of container in accordance with local regulations. Binds together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving. The biggest difference between an acid-based concrete stain and paint is how they react with the concrete. Acid-based stains actually penetrate and react with the salts and minerals in concrete to impart rich, deep, translucent tones. Although the color is long lasting and won’t chip or peel away, it can be unpredictable and will vary depending on the makeup of the concrete. Although priming is recommended for some concrete paints, many products are self-priming and can be applied directly to bare concrete. Be sure to follow the paint manufacturer’s recommendations. Also adhere to the manufacturer’s guidance for minimum air and surface temperatures during application, especially when painting outdoor concrete surfaces. In most cases, temperatures should be above 50° F.Any concrete surface you intend to paint must be free of contaminants and existing coatings, sealers, or curing compounds. Otherwise, the paint will be unable to fully bond to the concrete. The concrete to be painted should also have a slight texture for proper paint adhesion. If the surface is extremely smooth or has a hard-troweled finish, it may need to be acid etched or mechanically abraded first. Much of this advice on preparing concrete floors before staining is also applicable to concrete paints. Because concrete paint is a surface coating and vulnerable to abrasion, it’s not the best choice for high-traffic areas such as concrete driveways. For these applications, an acid-based stain or dry-shake color hardener will offer better wear-resistance.

Ensure all joints have a minimum full depth width of 5mm and are at least 20mm deep. The paving and joints should be thoroughly wet before application, but joints should be free of standing water, dirt, debris or weeds. Ensure the paving bedding is well drained. Seals and hardens concrete floors by penetrating into the concrete to give a robust non-dusting surface with improved resistance to oil and grease. Multicrete Products CONCRETE HARDENER & DUSTPROOFER is ideal for use in garage workshops and factories with both newly fitted or existing concrete floors. Do not ingest. In the event of ingestion, do not induce vomiting, drink plenty of water and seek medical attention.

Dustproofer & Hardener

Don’t confuse concrete paint with epoxy coatings, which are typically two-component resin-based systems that chemically bond with the concrete. Epoxy coatings are not as easy to apply as paint and they cost more per square foot, but they often are more durable and wear-resistant, making them a good choice for garage floors and other high-traffic surfaces. Hardens and dustproofs the surface silicate resins to both harden and dustproof new and old concrete floors Economical ready to use dustproofer for concrete floors, paths, garage and workshop floors and driveways. Use Sika FastFix All Weatherin small manageable amounts. Avoid spreading over a large area before application. Ensure material is all loose by raking through. Do not try to break up and use any small set lumps. Do not add any extra sand. Creteshield 101– is a Potasium Silicanate. It is at the top of the performance list. An advantage of Creteshield 101 is that it is hydrophobic, meaning it repels moisture. Most densifiers are hydrophilic, meaning they microscopically absorb moisture (they will stop moisture transfer, but over a long period of time they dissolve). Creteshield 101 will increase abrasion reistance by about 40%. Also suitable for greatly reducing Radon Gas. Creteshield 101 is the best product to use as a stand alone densifier.