There are also some attachments such as a pec fly, curl machine and leg curl attachments, although we don’t think these are as worthwhile the investment. Anyone who wants a wider cable distance for more of a cable crossover feel. The pulleys are only 48 inches apart making it harder for those with longer arms to do crossover type movements. So to answer your question, if I were in your shoes, I would most definitely go with Rogue–specifically, I would buy the Rogue R3. Solid and safe design: Polished steel guide rods; Wide lat pulldown bar and small flat bar; Easy load design; Ring stoppers; Industrial nylon bush carriage system The width of the M120 ranges from 78cm to 123cm whilst the bar height has an impressive range of 93cm to 151cm.

The safety catches are also moveable and easy to change – and of course allow you to lift heavier weights easier without the need for a spotter (we do recommend that you use a spotter though when working out with heavy weights). It did not show how one end of the cable connected and I only knew how to connect it because of what parts I had left over. One end of the cable is secured by a screw assembly and the other by one of the three ellipse hooks that were included. The R3 has the coveted “Westside hole pattern” (1″ hole spacing in the bench area; 2″ hole spacing everywhere else). Meanwhile, the Powertec has a larger gap of 2.5″ hole spacing all around, which isn’t terrible, but it’s much less precise for when it comes to adjusting the pins and catches during bench bench press.

Power and Squat Racks

I've thought about putting the holders on the outside of the front uprights but then there would be no safety bars to spot you. Lifters who aren’t sure about what attachments they want. You can add a ton of variety with the different attachments over time here rather than all at once. As for the assembly of the lat tower option, the illustrations in the instructions were small and somewhat hard to follow. Does this mean that it is impossible to do an incline bench press by lifting the barbel off of the holders from above your head and moving the barbell in a forward direction to the starting point of the lift?

We love both models. The Powertec model is great and if you have your heart set on it then by all means you won’t be disappointed. However, if you think you could reinvest the spare change from the more affordable M200 into a decent bench or some weights, then the smart choice in our eyes is to go with the Mirafit. Improved pull up bar (it’s wider and has capped ends to prevent the grip material from slipping), though, as I discuss here, I still have a complaint This really depends on your goals. Squatting helps to develop lower body muscles and is particularly useful for helping to develop the quadriceps, hamstrings, calves and the glutes. Performing squats also helps to develop your core muscles and as such it is one of the best strength exercises you can undertake. Some of the most common upgrades are different J-hooks, a lat pulldown, jammer or trolley arms, band pegs, an upgraded pull-up bar, bar holders, and weight plate storage. The options really are only limited by your space and imagination. Full-Body WorkoutsHanging leg/knee raises – expand your abs workouts by adding some hanging knee raises. You can even hold a dumbbell between your legs for added resistance! Be prepared for insane abdominal DOMS after this workout!

Max chin-up bar & dip bar load: 400lbs (181kg) perfect for heavy weighted pull-ups, chins, and dips. Trainees who want a lot of plate storage. You can get plate storage, but it’s more limited than other options on this list.Additional information: Weight load capacity - 136kg/300lbs weight horns, Dimensions (LxWxH) - 76 x 95 x 203 cm (30 x 37.5 x 80”)

It allows me to do all the exercises that I need it for, and it keeps me safe while doing them. With the exception of a couple small critiques, everything I have to say is positive about this piece of equipment. Read below for the specifics. Pros: The pull up bar is curved: The curved/angled pull up bar makes pull ups feel unnatural. I find it puts may wrists and shoulders in an awkward position. In my opinion, it would be best if Powertec used a straight pull up bar (preferably with hammer/neutral grip handles built in). That said, I can still do pull ups on it, but it’s not ideal. Also, I should mention that some people actually prefer this style of pull up bar, so this may not be a “con” for everyone.It is possible to squat on a Smith Machine but it isn’t advisable. The main reason we would not advise anyone to squat on a Smith Machine is that the bar path is dictated for you and is not ideally suited to squatting. When squatting you want to move the bar in as close to a vertical path as possible whereas a Smith Machine will take it in a path that is not completely vertical. Even with these minor problems, I still managed to put the whole thing together in about four hours. Both are fully compatible with 6ft international bars and all 7ft bars, have maximum loads of upwards of 286kg and are made from high quality powder coated steel frames. Consumers who have less room will like the more space-friendly dimensions of 87 inches tall, 47 inches wide, and 29 inches deep.