We recommend cleaning plastic substrate surfaces with a low-lint wipe. Read our full guide on adhesive bonding surface preparation to learn more about this topic. What is the best adhesive to bond difficult plastics?

Boning | Fabric Land

So first sew the seam normally, then trim one side of the seam allowance to 0.5cm or 1/4in. This would be the side where the casing will be created. You can also skip the interfacing, but it makes the garment sturdier. I’ve added boning, creating the casing from the seam allowances, without interfacing. So the boning will be enough by itself to maintain the bodice up, if that’s what you were wondering. 🙂 When deciding on how many seams your bodice will have, take into account that each of the seams will give you the possibility to insert boning. However, you can add more channels also in between the seams. Creating the trapeze silhouette for Dior, Saint Laurent has a rigid understructure veiled under a fly-away cage. A boned corset anchors the dress but allows the delusion of a free swinging cone" The miniature Dremel type drills are excellent for cutting and smoothing the ends of synthetic whalebone. Thanks Jen.So here we have a shining example of where, contrary to traditional streams of thought, the designer may have felt that plastic boning was best for this garment and used it instead of metal boning. The effect is sublime and as ever proves the point that we should use the things that work best for us and for the project in hand. Create holes for your eyelets, using either a cutter or puncher. Insert the eyelets using an eyelet tool or a hammer. But if you want to make a longer bodice, it’s not that much different. Just follow the side seam and dart shapes.” Tailed Petticoat for Wedding Dress/Long Tail Boned Bridal Petticoat / Pettıcoat, 1 Hoop, Stitch Bones / P-190 cm Tailed Petticoat for Wedding Dress/Long Tail Boned Bridal Petticoat / Pettıcoat, 7 Hoops Stitch Bones/P-460 cm

How to Draft Fitted Bodice Patterns for Strapless Garments How to Draft Fitted Bodice Patterns for Strapless Garments

Creating your own is a rewarding hobby, letting you gain new sewing skills, practice crafting techniques, and also acquire an intimate and comprehensive understanding of history.Some sturdier types of plastic boning can take the place of steel in a dress foundation and do the same job with the same effect. Cover the ends with little pieces of fabric so that the nylon won’t poke out from the bodice. Another way is to melt the nylon rod tips with flame until they become round. Rigilene boning is too thin and flimsy to support a functional dress foundation and it will not stand up to the job

Whalebone vs. Steel – Redthreaded Synthetic Whalebone vs. Steel – Redthreaded

You might want your fitted bodice to have separate cups. Here’s the first version of the bra-top. Basically it’s very similar to the previous design, it’s just that in addition you draw the bra styleline. Thus, in both surface decoration and in structure, Saint Laurent gained the effect of ethereal, bouyant freedom while retaining the structure of the couture. From the earliest works at the house of Dior through the designer's accomplishments in his own house, Saint Laurent has practiced and perfected this modernist wielding of couture construction and proficiency to seem wholly unfettered" all of our wear tests have passed with no issue, but we haven't personally had the opportunity to put this product through a year+ long Broadway run or similar The bra styleline should be located under the bust, so you’ll need the bust point – underbust distance measurement here. Draw whichever type of curve you prefer. The cups can have a gap in between, too. In that case you’d continue pattern piece number 3 all the way up and cut it on the fold, and the cups would start maybe 1cm or 3/8in. from the c.front.Great tutorial- thank you. I am making bridesmaid dresses and the bride (my daughter) wants a strapless fitted crossover bodice – how would I go about adapting the corset pattern to do this? Any suggestions appreciated! Many plastic surfaces don’t provide an ideal adhesion base without surface treatment or the application of a primer. This is due to their low surface energy and tendency to gather dust particles. MMAs (methyl methacrylate adhesives) have a much higher peel strength and temperature resistance compared to epoxy adhesives. MMAs can be used to bond thermoplastics including ABS, PVC (rigid and flexible), acrylic and polycarbonates. Now, it’s time to sew the two seams beside the main seam line. Create a 3/8 inch channel for the bones, ensuring they have enough room.