For a start the mod has a lot of extra features without being too complicated to put new vapers off. Little details such as the On/Off slide switch, easy to see LED indicators and excellent build quality have made this mod feel more expensive than it actually is.

I would also like to say how grateful I am for the additional coils supplied with my review kits – this means I can test all coils available! Locate the micro-USB charging port on the side of the battery. This is where you will plug in the charging cable. Connect the other end of the charging cable to a USB port on a computer or a USB wall adapter. It's important to use a reliable and compatible charging cable and adapter to ensure safe and efficient charging. The T-16 was deemed a failure, as it had problems with its transmission failing too often and its inability to cross trenches more than 1.5 m wide. [2] The T-16's maneuverability was only marginally better than that of the Renault. Meanwhile, the КБ ОАТ drew up plans for an improved version of the T-16 which was accepted for production in July as the T-18, with the tank additionally noted as an MS-1 ("Support vehicle, small, type 1"). Tanks with high resistance coils perform better with nic salt. This is because they produce less vapour so require a stronger liquid to deliver a quality throat hit with great flavour. TECC Titan pairs perfectly with MTL vape tanks because of the high PG content. This allows it to be absorbed easily by the coil as well as delivering a sharp throat hit.I have personally used the T18, T18-II, T18-II Mini, T20-S and T20 kits and think they are such an excellent place to start for any vaper. The new Innokin T18e Tank is a great new sub ohm tank that’s durable, compact and simple to use refill. The Innokin Prism tank has a simple top fill twist system allowing problem free refilling of your e liquid or e juice.

Starting at the top of the mod the 510 connection plate is made of metal and you should be able to use a tank of 22mm diameter or less. Do please keep an eye on the e-liquid level – as this needs a lot of filling I found that once I let it drop below 1/4 full it resulted in me burning out the coil unfortunately.

Obviously there are a lot of variables concerning battery life – such as your own vaping frequency and nicotine strength. Plus with this kit the type of coil and power level will also make the battery life vary. Finally on the display side is the USB Type C port I had no issues at all charging. Prism T18E Pro Tank A nice looking tank – looks a bit tall for its 20mm diameter but still quite classy. Innokin Endura T22 Pro – T18E Pro Coil Options Below the fire button are the 4 power level LEDs – these light up according to which power level you have set, again these are clear and bright. From simple starter vape tanks to the more powerful sub-ohm e-cigarette tanks, there are plenty of diverse vaping options available, each enabling a different vaping experience.

this is slightly warmer and quite dry I would imagine this setting would result in a lower coil life. Not as enjoyable as the 12.5W setting. Innokin Endura T22 Pro Coil Summary I.e. an old PC USB port only outputs around 0.5A whereas some of the modern charging plug adaptors and charging stations can output up to 2A. One specially designed T18E Pro 1.7 Ohm coil is included with every tank to get you started. Long-lasting they will support multiple refills. Replacements are easy to find and you can also pair this tank with the classic 1.5 Ohm and 2.0 Ohm T18E coils. To support these coils and the recommended MTL vaping style, this tank should be paired with either a high PG or 50/50 e-liquid.This despite looking like it is made from metal actually lights up in green, red or yellow depending on the battery charge remaining. The T-18 and its derivatives were essentially unsuccessful designs, but they gave Soviet industry its first experiences in designing armoured vehicles, and in the meantime a number of foreign tank designs were available for production. Instead of a screen there are 4 LED indicators below the fire button to display the selected power level – I will talk more about these in the Basic Operation section. Open circuit – the LED will flash when the fire button is pressed – make sure tank and coil are correctly installed.