The sled can be set up on either the left side or right side of the blade, and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade. ZERO side play, low-friction travel on table saws with square-sided miter slots measuring 3/4 inch (19 mm) wide, 3/8 inch (9.5 mm) deep, and with or without a 15/16 inch (23.7 mm) T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740 and 0.765 inch (18.8 - 19.4 mm) The advantages are simple: The Miter Express doubles your miter gauge's capacity for cutting large panels, it offers more hold down options for greater safety when cutting small parts, and it provides better control overall because the lumber is carried through the blade instead of pushed across the saw. INCRA Miter Gauge V27 is engineered to provide a high performance, yet low cost upgrade for any tool in need of a better miter gauge such as a Table Saw, Band Saw, Router Table, Disk Sander or Belt Sander.

The Special Edition Miter1000 comes standard with Incra’s finest cross cut fence, the FlipFENCE and FlipSTOP. The unique design of this fence guarantees a perfect stop point for mitered board ends. When in the stop position, both flip arms fully engage the front surface of the fence, thus preventing the board tip from slipping behind the stop. As shown, the same INCRA HoldDown Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand. This Special Edition Miter Fence telescopes from 36" to a full 64" length. Includes the Dual Flip Shop Stop and INCRA's patented Automatic Positioning Control. INCRA Miter Gauge 5000 blends the incremental angle control features of the Miter 3000SE with a very special 3-Panel Sled for the ultimate miter cutting workstation for the table saw.Summary: This gauge is an absolute beauty and the materials seem to be of a higher than typical quality. There are seeds of greatness here but there’s a major failure in execution, several missed opportunities, and a couple of regrettable choices. There’s always a chance that I received a bad unit, but I’ve heard from others who have the same issues and many of the problems with this thing are just the way it was designed. Furthermore, my personal experience with their technical service left a lot to be desired. Am I being a little hard on Harvey here? You bet I am. When a company charges 30% more than the nearest competitor, they’ve got something to prove. And judging from the unit I received (and the customer service), Harvey came up short. Final Thoughts Perfect for the INCRA V27 and V120 miter gauges and upgrades the Miter 1000 to Miter the 1000SE.The Flip Fence is designed to give you outstanding fence performance and rigidity. Manufactured by INCRA from aircraft-grade aluminium extrusions, this fence profile is designed to coordinate perfectly with the INCRA Flip Shop Stop. The INCRA Flip Fence and Flip Shop Stop are popular upgrades for all INCRA Miter Gauges, and the Flip Fence's mounting T-slot also allows integrating this stop and fence system into sleds and miter saws.

Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers.

incra miter sleds

INCRA Miter Gauge V120 features an incredible 120 angle stops which are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings. For adequate support laterally, the Miter 5000 requires a minimum of 254mm (10") from the side of the outer edge of the miter slot to either the left or right edges of the saw (sled can be installed on either side of the blade). While the V27 delivers ALL the accuracy of its bigger INCRA Miter Gauge brothers, its no-nonsense design and compact size make it the most affordable INCRA Miter Gauge EVER! Now, the INCRA Miter V27 makes it possible to put an INCRA Miter Gauge in EVERY standard miter channel in your shop. Whether it's your basic 90° cut-off, simple picture frames, or a 20-sided object, the Miter1000SE byINCRA delivers perfect, repeatable accuracy.First time, Every time, Any angle.