Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property. Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41 This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest. The precise duration of the overrun is normally configured during installation, with most fans offering a range between 30 seconds and 30 minutes. You might as well tend towards the latter end of the scale as the cost is very low: on average, a fan like this uses around 8W. IPX4 rated, the Simply Silent C4HTSR range is suitable for use in bathrooms, toilets and cloakrooms in Zone 1 if protected by 30mA RCD, otherwise Zone 2 and can be window, wall, ceiling or panel mounted.

Humidity extractor fans can be very effective in reducing excess moisture in a room or area. They work by drawing in humid air and expelling it outside, which can help prevent mould growth, reduce the risk of respiratory problems, and improve overall air quality. However, the effectiveness of a humidity extractor fan depends on several factors, such as the size of the fan, the size of the room, and how often the fan is used. It is also important to properly maintain the fan, including regularly cleaning the filters and ensuring that it is installed correctly. Overall, humidity extractor fans can be a useful tool in managing humidity levels, but it is important to do your research and choose a high-quality fan that is appropriate for your specific needs. Xpelair Simply Silent Contour fans are powerful 4 inch silent running bathroom extractor fans designed to reduce nuisance running noise whilst controlling excess humidity, odours and mould growth effectively.

Blow off some steam, banish damp and wave goodbye to condensation with our favourite bathroom extractor fans for every budget

Will comply with Building Regulation Parts F and L if installed in accordance with the manufacturer's instructions and by a competent person. We found the Best Humidistat Extractor Fan to be the Xpelair C4HTS. It is one of the most popular humidistat extractor fans on the market, runs quietly at just 16dB, has two speed options (15l/s and 21 l/s), features a run-on timer, and more! Are humidity extractor fans any good? Please be aware that we currently cannot arrange for delivery of this product to the following postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, BT, PO30-41. Then when I got somebody else in it needed new tubing on the inside, the vent on the outside disintergrated when touched so I had to buy the kit for that, and it had to be filled all aroound the openeing because the whole tile had been removed when the old one was put in rather than just a hole cut, which I did. A humidistat is a device that measures the level of humidity in the air. When it is installed on an extractor fan, it helps to regulate the amount of moisture in a room or space by automatically turning the fan on or off depending on the humidity level. When the humidity is high, the humidistat will activate the fan to remove excess moisture from the air, which can help prevent mould and mildew growth, reduce odours, and improve indoor air quality. The humidistat also helps to save energy by only running the fan when it is needed, rather than constantly running it at full speed. Overall, the addition of a humidistat to an extractor fan can help to create a more comfortable and healthy living environment. Should I get a bathroom fan with a humidity sensor?

The fan comes in a UV-resistant brilliant white finish that will blend seamlessly into any wall or ceiling. The front panel is removable, making cleaning and maintenance a breeze, while the adjustable run-on timer allows you to customize the fan’s operation to your needs. We tested this with the main isolator switch and if the bathroom light is off, and we turn the fan switch on it starts running immediately. But if the bathroom light is ON and we switch the fan switch from off to on, then it DOESN'T spin. Finally, if you think you (or anyone else in the house) will forget to turn the fan on, consider a model with a humidity sensor. This automatically activates the fan when the level of moisture in the air exceeds a certain threshold. This sensor may need occasional cleaning, though, or the accumulation of dust or grime will hinder its effectiveness. What about noise? The Blauberg 100 Quiet Style TH is the perfect solution for those looking for a powerful and stylish fan that won’t break the bank. German-engineered for quality and reliability, this fan boasts a powerful airflow extraction rate of 27 litres per second, making it perfect for use in toilets and bathrooms.

The PureAir Sense comes with two spigots (or sleeves): one for standard 100mm installation and another for larger 125mm portals. The larger spigot is the one to fit if you want to benefit from its excellent 39l per second flow rate. That said, its standard 32l per second flow rate is still better than most and easily good enough for the majority of bathroom installations. We turned the timer down to the lowest so we can better see when/why it's turning off and we put the humidistat to the highest so that presumably it should only go on when we're showing and not running needlessly. Vent-Axia has really pushed the boat out with this brand-new model. Aside from shifting up to 39l of damp air per second, this bathroom extractor comes crammed with more sensor tech than any other model on the market. In fact, it has a sensor for everything, even odour. Yes, that’s right, when this clever little air mover detects a nasty smell, it either switches itself on or, if already running, speeds up the fan, returning the bathroom to its original sweet-smelling scent in a thrice.

Most domestic bathroom extractors attach to a 100mm hole in the outside wall. If you’re replacing a standard-sized extractor fan, this hole will already be present and you should be able to install the new one yourself. Before you remove the old fan, it’s a good idea to take a photo of its wiring for later reference – and make absolutely sure you shut off the mains power before you take the old one’s front housing off. However we've noticed that is is turning off 30 seconds after the bathroom light is turned ON instead of 30 seconds after it's turned OFF. The C4SR range comes with a two year UK guarantee for peace of mind. Features of Xpelair Simply Silent Contour C4HTSR Include: The C4HTSR model benefits from an adjustable over-run timer and a humidistat to automatically regulate humidity levels. The timer can be set at the point of installation between 30 seconds and 30 minutes.

The best bathroom extractor fans you can buy in 2023

In a survey carried out by ventilation specialist Vent-Axia, 40% of respondents said that they or their children had been woken in the night by a noisy bathroom fan. Even the cheapest fans are usually very quiet out of the box, but as the motor bearings start to wear – typically after about two years with low-end models – the blades can start to oscillate against the main housing, producing an annoying rattle in the process. A higher-quality fan should last longer, but if you value quietness then at some point you’ll probably need to repair or replace your fan. How do you install a bathroom extractor fan? Flow straighteners guide air through ducting which reduces turbulence, smoothing and making the air flow laminar. If you wish to return your item to Robert Dyas, you can do so by the following method: 1. Request a Collection via Robert Dyas Customer Services This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product The C4HTSR range of 4 Inch extractor fans benefit from a range of features which allow them to deliver near silent running. Advanced Ghost™ Air Movement combines long-life silent running motors with precision engineered components alongside advanced air flow management which eliminates irregular air flow paths which can cause noisy extraction.

Yes, it is highly recommended to get a bathroom fan with a humidity sensor. This type of fan can detect the level of humidity in the bathroom and automatically turn on and off accordingly. This is important because high humidity levels can cause mould and mildew growth, which can be harmful to your health and damage your bathroom. A bathroom fan with a humidity sensor can also help reduce moisture buildup, prevent condensation on mirrors and walls, and improve air quality. In addition, this type of fan is convenient and energy-efficient, as it only runs when needed. Overall, investing in a bathroom fan with a humidity sensor is a smart choice for maintaining a healthy and comfortable bathroom environment. Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets If you don’t already have a fan, you’ll need to get in a qualified builder to make the hole and install the wiring. Be aware that there are regulations governing where your fan can be located: if you want to put a fan in Zone 1 (the area within a shower or 2.25m above a bath) or Zone 2 (60cm from Zone 1), it must be a low-voltage SELV fan with a transformer, or an AC-powered model that’s IPX5-certified. Most of our recommendations below are intended for use outside of Zone 2, but the layout of your bathroom may dictate your options.

My basket