But it is the POE injector that came with the UAP-AC lite, which is spec'd on the box to be up to 850mbps. There was also the uncool tendency of Google just abandoning a project they feel isn't worth it anymore for them (either it's not making them any money or who knows, maybe they just lost interest). I have looked arround for a quantification the difference for home use (4 persons, 2 phones, TV, Tablets, 5-6 computers, internet, fileserver, streaming, gaming, IoT-devices…) – can you give some quidance on your thoughts on these products for me as a home user? Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.

[SOLVED] Poor performance with Unifi AP - Wireless Networking

Read my full review of the new Unifi 6 Lite and 6 Long Range in this article, including performance tests. in the unifi controller under the AP is the Uplink Wired section, which confirms the negotiated speed is FE (100mbps). Just want to share my appreciation to everyone, you truly are a blessing to help shed light in the right areas and I thank you each. My only hope is that they spend more time polishing the 'consumer' end-user features, like mobile phone setup, and making the UI a little easier to manage. In this setup the wifi from the Netgear router gets 800-930mb/s, while the UAP-AC Lite will get absolutely NO more than 95mb/s.use the router/modem for the groundfloor (living room) and put the UniFi on the ceiling of the second floor to cover first and second floor. Intuitive UniFi Controller Software Configure and manage your APs with the easy-to-learn user interface. Dual Radio Access Points have a refined industrial design and can be easily installed using the included mounting hardware.

Ubiquiti UniFi AP AC Pro Indoor/Outdoor Access Point (UAP-AC

You are able to roam to the various AP's and they do have the ability to choose the least congested channels if you are in a multi-tenant building. My friend, IT professional recommend me the Ubiquity UAP Pro access point that should be configured with Unifi controller software. A good use case for the in-wall access points is to fill in the black spots in your wireless network.If you don't care, you're in luck - every UniFi AP, including AC and PRO models, come with a 24V PoE injector, so you can just use that. The UAP-AC Pro is rated for up to 1,300 mbps on 5ghz, but am only getting a constant 95mbps, and is auto-negotiating at FE (100mbps). But the advantage of the 6 Lite is that it supports WiFi 6 with OFDMA allowing it to handle more clients simultaneously. Note I have split the table in two, in the first table you will find all ceiling and wall mounted access points, and in the second the In-Wall and Range Extenders.

MS (Distribution) UK Ltd. - Ubiquiti UniFi AP AC Pro Access Point

RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated. Ubiquiti devices are really designed as business/enterprise class products and require a bit of a learning curve. But being "mini" it's builtin antennae had horrible range (on top of the already known limited range of 5GHz compared to 2. In this UniFi AP comparison, we are going to take a look at the differences and help you pick the right access point for your network.

I have tested the cable used to the AP just now, in the same port the AP is using, and plugged it to my pc and did get over 900mbps. Also, most new mobile phones and notebooks support WiFi 6 these days, so if you are looking for a new access point I really recommend picking a WiFi 6 model. If we look at the specifications then the LR is slightly better than the new Unifi 6 Lite access point. only) versions of these several years ago at a job where they bought some upon recommendations a coworker and I had made. Hello, in a separate topic I received great help regarding setting up my new Watchguard Firebox I purchased for my home and still configuring policies to maximize throughput.