IEEE 802.1X uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards

X132 10G SFP+ LC ER Transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 40km (24.9 miles) on OM3 fiber cable - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY speed is NOT supported for the J8177D when used in any port (SFP+, SFP28, or SFP56) on teh 6400 series. The JL687A module requires configuration of "interface groups" (groups of 4 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs). RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 1/10GbE ports; PHY-less VxLAN encapsulation (tunneling) protocol for overlay network that enables a more scalable virtual network deploymentX121 1Gb SFP RJ45 T Transceiver - Small Form-factor Pluggable (SFP) Gigabit transceiver using 1000BaseT technology - Has one RJ-45 1000BASE-T port - Requires Category 5 100-ohm UTP or STP cable or better The 8325 requires configuration of interface groups (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). X122 1Gb SFP LC BX-U transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'upstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port For J8705A and J8706A modules: All (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 2.0m (6.56ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km

For use in the SFP ports of the J9263A 6600-24G Switch, the J9264A 6600-24G-4XG Switch, and the J9451A 6600-48G Switch

JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL259A, JL260A, JL261A, JL262A, JL557A, JL558A, JL559A

Robust Layer 3 feature set includes Access OSPF, static and RIP routing, ACLs, sFlow, IPv6 with no software licensing required.Only supported for use in the SFP⁠+ ports on R0X43A module. 100FX is not supported for use in the R0X44A SFP28 or SFP56 ports of any other 6400 module. J8177C/J8177D will have a delay (~15 secs) before link up or down is properly displayed when a cable is inserted or removed. The 25G module (JL687A) requires configuration of interface groups (groups of four ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (Interface Groups default to 25G speed).

EN 55032:2012/CISPR 32 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438 Zero Touch Provisioning (ZTP) simplifies installation of the switch infrastructure using the Aruba Activate-based or a DHCP-based process with AirWave Network Management For J8705A and J8706A modules: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 For J9263A, J9264A: K.14.03 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483)

Overview:

CAT 5e cable RJ45 to RJ45 4.3m (14ft) - Up to 1 Gigabit operation, Ethernet cable with (M) RJ45 connectors on each end Premier Flex Multimode OM4 LC/LC Fiber Optic cable, 15m (49.2ft) long - Duplex zipcord graded index 50/125um multimode 'bendable' fiber optic cable with LC/MPO connectors on each end (Blue Color) - Optical performance: 4700MHz/km Aruba Dynamic Segmentation extends Aruba’s foundational, wireless role-based policy capability to Aruba wired switches. That means regardless of how users and IoT devices connect, consistent policies are enforced across wired and wireless networks, keeping traffic secure and separate. Supports Aruba Airwave Network Management software to provide common platform for Zero Touch Provisioning management, and monitoring for wired and wireless network devices. J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A