Use a clear gravel binder if you want UV protection for your aggregate (the color of the binder will not fade to yellow over time). Kneeling Pad - The Comfy Bull As resin bound installers spend a lot of time knelt, The Comfy Bull offers protection for knees and shins, helping to reduce fatigue and injury Grass Fitting Accessories Range of fitting accessories including jointing tapes, underlays and adhesives

X-Grid Range Our own range of ground reinforcement and gravel retention grids which can be used for dozens of applications and is trusted by thousands of contractors Resin Bound surfacing is made by mixing a combination of aggregate and resin together to create a smooth, seamless surface. In all cases surfaces should be clean, dry, sound and free from any oil or contaminants. The gravel should also be completely dry before being mixedwith the resin.

How long does it take to install?

Resin driveway, patios and paths are easy to install with our resin bound gravel kits. It really is the most cost effective way to cover a relatively small area. After you have finished your resin bonded driveway, it will last for many years. This makes the overall cost even lower when it is spread over the lifetime of your installation. When you are done mixing, empty your mix into a plastic lined wheelbarrow and turn off the mixer. You should ensure that you have all the mix scraped off from the mixer and clean it thoroughly after every mix so as to prevent contamination. 4. Transfer Your Mix to the Work Area

Dependent on weather conditions, the resin mix starts to cure almost immediately and you will have around 20-30 minutes per mix to screed the resin to the required level. Resin bonded finishes tend to be the cheaper of the two solutions, although they are non-permeable which is not always suitable and often leads to puddles and drainage issues. Resin bound driveways, on the other hand, are permeable meaning water can freely disperse. They also result in fewer loose stones and an overall smoother, more uniform surface. Not only does Permeable Paving look great, but it’s designed to allow water to pass through the surface and prevent flooding, by allowing water to seep through and recharge groundwater. Resin Bound Gravel Kits We have a comprehensive range of the most popular blends of gravels to make resin bound gravel installations as simple as possible.Generally this sort of paving installation would be done using a macadam sub-base. This provides the best durable, porous qualities. Related Garage Floor Epoxy - What You Need To Know Before Going DIY Read article 6. Finishing Touches If you are laying your driveway on an existing surface such as concrete, it is important that you prime the surface. Applying a primer on the surface helps to ensure the surface is dry and free from any contaminants. A wet surface will introduce moisture into the resin which would cause white patches after the resin has cured. Priming also helps to ensure that the concrete surface and the resin mix bonds properly. Gravel Bonding Resin binds together small stones with high-tech UVR* resin to form a firm, attractive surface which is permeable when used as a resin bound system

Gravel-Lok™ single element, moisture curing liquid adhesive that was designed to bond a variety of aggregates. When this adhesive is used with Cell-Tek's LSG Series™ Load Support Grid, it will create an absorbent, durable natural stone surface that can be used in many different civil, residential and industrial applications. It is also ideal for municipalities, parks, other porous surface projects, and stonescaping in residential areas. So to the big question: how much will your driveway costs come to if you opt to have a resin driveway installed?

With the proper mixture at a 2” depth of gravel stones, you can treat about 18 square feet of stone per gallon of the binder. There are over 50 different aggregates available and therefore just about any color scheme can be catered for. Carefully blending with different colors can create a different look and color. Also, there are a number of aggregates can be colored to let customers select finishes of just about any color they want. And if you think that sounds easy, Vuba make it even more of a doddle by selling 5 litre spray bottles of the EasiHold so there’s not even any need to decant from the larger 25 litre containers used on larger jobs.