However, to ensure grout can 'key' between slabs, important to leave a gap and clear under edges when laying slabs.

When used correctly and the EASYJoint instructions are followed there will be no staining or framing to the paving. Must be applied wet as stated by manufactures, finish off with a suitable pointing tool for a smoother contoured finish, if required. Please note that drivers will unload materials to the side of the lorry but are not authorised to carry goods any further. It is important to note that linseed oil staining is only a temporary stain and exposure to sunlight, will over time, lift the marks and fade away. A stronger mix may cause the base to become impermeable and this will mean that water does not drain away.No it shouldn't if used correctly by following our instructions, however there is always a chance that the Linseed oil will seep into the paving.

Yes, you can clean our paving joints with a pressure washer but it must be done cautiously and after the EASY Joint sweep in sand has set hard. Water can also help the compound flow in to the full depth of the joint cavity and aids compression of the compound.Secondly, the water helps the compound flow in to the joint cavities and helps with compaction for a fuller joint without voids.

Moreover, it is strong enough that weather won't affect it throughout the years—it will remain resilient no matter what. The wash and sweep in application method makes EASYJoint easy to use and faster than traditional methods. No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water. Grout joints normally set within 12 – 18 hours although we would recommend leaving them for up to 48 hours to ensure they are fully set before use.

This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. To assist in forming a stable joint when laying the paving, draw the tip of your trowel along the bottom edge of each slab so that a small gap forms along and under the paving edge. EASY Joint is the UK’s top selling paving jointing compound, favoured by professionals and DIY installers all around the world.

Particularly sensitive, porous stone should always be sealed on both sides and all edges as a precaution.This was ideal super simple to use and has gone off perfectly, transformed two patios with the one tub. Due to the structural requirements of a driveway and that generally, the bedding mix is stronger than that of a patio or path, the use of EASY Joint is not recommended. Both have sand binder in them and work in similar ways however EASYSeal BCS is the superior product and lasts longer. Very fast to use: The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology. High Quality Paving Jointing Compound - It is suitable for all types of paving products as long as a minimum gap of 3mm and 25mm deep.