Dryzone Anti-Mould Additive 100ml Concentrate to Make 5L of Emulsion, Vinyl, Silk or Matt Paint

£9.9
FREE Shipping

Dryzone Anti-Mould Additive 100ml Concentrate to Make 5L of Emulsion, Vinyl, Silk or Matt Paint

Dryzone Anti-Mould Additive 100ml Concentrate to Make 5L of Emulsion, Vinyl, Silk or Matt Paint

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Add 100 ml of Dryzone® ACS Mould Eradication Additive to 5 Litres. Blend the additive liquid until fully dispersed, for at least 1 minute. Preparation is straightforward and very similar to normal good decorative practice. Remove any loose material such as old paint, grease, dirt, mould or defective wallpaper. Dryzone® 100 Mould Killer can Add 50 ml of Dryzone® ACS Mould Eradication Additive to 5 Litres. Blend the additive liquid until fully dispersed, for at least 1 minute. Remove and Prevent Mould & Mildew infestations using Dryzone 100 Mould Spray in conjunction with Dryzone Anti-Mould Paint Additive. Dryzone Mould Additive Adds mould-resistance to most paints, wallpaper pastes and grouts

Wash and clean all surfaces (walls, ceilings, window frames and joinery) using Dryzone® 100 Mould Killer. If necessary clean badly affected areas a second time. The formula should be mixed thoroughly to ensure that the paint is completely protected. Since we used this over two years we have had no signs of mould appearing on the bathroom ceiling. Easy to Use & Cost Effective - Just spray Dryzone 100 on the affected area and wipe after an hour. Mix the correct amount of Dryzone Additive directly into the desired Paint and apply as normal. Highly Effective – Stop the Spread. Because it’s Biostatic effect, Dryzone 100 stops the mould from spreading to other areas whilst also reducing the risk of recurrence.

Any paint that you have can be turned into an anti-mould coating to protect against mould and fungus in the home using Kair additive. The anti-mould additive for paint by Keir range is an ideal way of combating nasty mould growth in a home. Add 100 ml of Dryzone® ACS Mould Eradication Additive to 5 Litres. Blend the additive liquid until fully dispersed, for at least 1 minute. Application If necessary, apply an appropriate primer or sealer to new, unprimed or porous plaster and wooden surfaces or bare metal.

The 50ml pot will turn 2.5L of paint into a anti-mould coating that once applied helps to prevent the growth of mould.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop