Sleeve up the Pokemon card as normal. Be gentle as you do it. You don’t want to be creasing the edges of the card. It is going to be quite a tight fit. It can be easy to accidently damage or bend your card, especially if you have never used a toploader in the past. Using a toploader isn’t that difficult. Simple pry apart the side and slide your card into the middle. These particular Premium Toploaders are acid-free (so your cards won’t become discoloured from long term storage) and clear in terms of their transparency. There’s an awful lot of non-branded – or at least non-recognisable, non-household name – manufacturers of toploaders for trading cards out there. The best size toploader for Pokémon cards is 3″ x 4″. Most toploaders come in this size, and offer alternative sizing for larger collectible cards, or sports cards. Standard trading cards are 2.5 inches by 3.5 inches (6.4 cm by 8.9 cm), which includes the Pokémon Trading Card Game cards. How To Use Toploaders for Pokémon Cards?

Toploaders are not necessary for protecting trading cards, but they can provide extra protection, especially during transport or shipment. If you want to ensure the condition of your cards remains as good as possible, toploaders can be a good investment. The main characteristic that makes these toploaders so sought after by collectors is their quality. The plastic is made with a super clear, rigid PVC. This helps protect against scratches and bends. Unfortunately, these toploaders do tend to show scratches easily on the outside if you aren’t being careful. Extra protection: Toploaders provide extra protection against scratches, dust, moisture, and other potential sources of damage.Once your card has been placed into the sleeve, you can gently slide it into the toploader. To do this, part the opening of the toploader a little. Don’t stretch it too much. You want just enough space to be able to get your card in there. These toploaders offer decent protection and are ultra clear and durable. They aren’t the best in terms of quality if that’s what you are after. One really good trait with these toploaders is that they leave minimal footprint. They are lightweight and easier to use than other brands. Simply separate the side of the toploaders and slide your card inside. This can be both a pro or a con depending on how you look at it. Many of them can be pretty unreliable – but here at Retro Dodo, we’ve actually found that these Savita toploaders are a lot more consistent and high quality in comparison to many of the other unfamiliar (and cheap!) options out there.

You are looking for any toploader that measures 3″ x 4″. You can opt for something slightly larger, but your cards will likely bounce around inside of them, and thus it wouldn’t really be good for protecting your Pokemon cards. The sacrifice made with this option, is that the toploaders are usually thinner and do not do as good of a job protecting the cards from bending. There is also sometimes residual glue left over from cheaper manufacturing practices. This somewhat defeats the purpose if your cards can be damaged when you put them in the toploader OPTION 2: Quality Once again, you probably wouldn’t need to think too much about the size of the card sleeves that you need. This is because Pokemon trading cards are a standard trading card game size. Out of the big games, it is only YuGiOh cards that are different. It’s subjective to determine which is better between Ultra Pro and BCW as it depends on personal preference and the specific needs of the user. Both Ultra Pro and BCW are popular and well-respected brands in the trading card protection market. Ultra Pro is known for offering a wide range of products with good quality and affordability, while BCW is known for its high-quality materials and clear protective sleeves. Ultimately, the best option will depend on the user’s specific requirements, budget, and personal preference.

Where To Buy Toploaders for Cards

Which means that there’s no issue of clarity when it comes to being able to view the cards being protected by these toploaders. You should be using standard sized toploaders for your Pokemon cards. Anything other than standard size may either be too small or too big to safely house and store your cards. Simple: Ultra Pro always produce high quality Toploaders that are consistent, solid and reasonably priced.

These toploaders are also highly recommended to be coupled and used with the Ultra PRO Premium Card Sleeves as well as their regular card sleeves. Convenient handling: Toploaded cards are easier to handle, as they are protected from damage and do not get easily bent or damaged. When you go for quality, or a well-known brand, you are often in safer hands. At the end of the day, these are your most valuable cards you will be putting into the toploaders, so you want to make sure they won’t damage your cards, or cause wear over time. What Size Toploader For Pokémon Cards? Make sure that your card gets all the way to the bottom of the toploader. When it is at the bottom, the top of the toploader should shut closed. Your card should now be fully protected! What Size PT Are Pokemon Cards?They also have all of the features you’d expect from branded toploaders too – such as a narrow opening, solid construction and friction-resistance too. I’ve seen the “floppy” card savers used for PSA submissions and I don’t think that’s what I’m going for. Their brand can be found in just about every retail store around the world. From big name retailers like Target and Walmart, it isn’t hard to find an Ultra PRO product. They market and sell their products through a huge top-tier network of over 120 distributors worldwide. They have distributors and customers in North America, Europe, and even Asia. BCW