Our Square Plastic Plant Pots are suitable for use in several systems such as propagation flood systems, drain drip feed systems or a bespoke home system. These pots are made from a high-quality durable plastic and are shaped to maximise space efficiency. Made from a high quality “squashy” flexible LDPE plastic to fit through the opening of your pot. Choose the correct diameter and height for your pot whilst taking into account the internal diameter of the access hole. If required, the height of the liner can be trimmed down with scissors and then squeezed into the pot below the rim to create an unobtrusive barrier into which you can pot your plant. Storage & organisation Furniture Textiles Kitchenware & tableware Kitchens Lighting Decoration Rugs, mats & flooring Beds & mattresses Baby & children Smart home Bathroom products Laundry & cleaning Plants & plant pots Home electronics Home improvement Outdoor living Food & beverages Christmas Shop Shop by room Ideally, there are different types of plant pots with a variety of shapes and sizes. The plant pot size will determine the soil level, level of saturation, and the type of plant to be planted in the container based on the plant root system. Using the correct size of a container will ensure plant health. What is the ideal Plant Pot size? The size doesn’t refer to the plant, but refers to the diameter of the pot that it is planted in. When choosing a pot for your plant, choose a pot that is 1-2” (2.5-5 cm) larger than the current size if the plant is currently in a 10” (25cm) pot or smaller. If your current pot size is larger than 10” (25cm) , choose a pot that is 2-3” (5-7.5cm) larger in diameter. Plant sizes are shown as the grow pot diameter x the total height of the plant. This means the diameter of the grow pot at the top of rim x the total height of the plant including the grow pot. It therefore includes the plant roots etc as well as the height or length of the plant.

These professional quality pots will allow you to achieve larger yields due to their space efficiency and ease of use. Please note the above guide is for illustration purposes only and are not sized proportionally to one another. Adding an internal pot liner gives you the peace of mind that your decorative pots will remain pristine and protected from nutrient deposits and that floors and furnishing will be protected from leaks from porous pots. For hydroculture plants use the size tip to select a decorative pot that will accommodate the waterproof liner recommended for the plant in the hydro kit.As a matter of fact, the container sizes you use depend on the plant size. To avoid root rot we have outlined the recommended soil depth, soil volume in cubic feet and cm, and soil weight in lbs and grams. For custom plant pot sizes that the container plant thrives well we have outlined the estimated pot sizes in inches and cm and estimated pot sizes in inches and cm to ensure excellent drainage. Estimated Pot Sizes in (Inches and CM)

The grow pot height is standardised (normally 12cm or 19cm) and shown on the size option for each hydroculture plant. Ensure the external height of your decorative pot is at least 2-3cm higher than the grow pot height of the hydroculture plant.Important: The opening measurement of the decorative pot is the size of the access hole for inserting the plant's grow pot as well as an indication of the minimum liner size needed. It is not the same as the external diameter of the pot which is the overall outer size of the pot. Please note all measurements are approximate and can vary slightly due to the handmade nature of our pots. Drainage: Traditional indoor plant pots have drainage holes and stand in saucers to allow excess water to drain freely. For modern decorative plant pots without drainage holes the grow pot could be stood inside the pot on a saucer, or in a pot liner for extra protection. Alternatively, for a professional design look, the plant can be repotted directly into a pot liner with a layer of hydrogranules to provide both a drainage layer and a reservoir for the plant. The roots above the granules will pull the water gently out of the granules (capillary action) to keep them moist but not wet. Hydroculture plant roots have been specially adapted to grow in hydrogranules, which creates a smaller, more fleshy and hardier root system. This results in mature plants being available in smaller grow pots than their soil based equivalents. How do I choose the correct sized decorative pot to fit my houseplant? Hydroculture plants are measured the same way as soil plants, however the grow pots are sized by diameter plus their standardised heights, which allows a water meter to be fitted. For example: an 18/19 grow pot has an 18cm diameter at the rim and is 19cm tall.

Note: Liners are "squashy" so they can be pushed through the opening to expand and fit closer to the pot wall once inside. Liners can also be cut down to size with scissors for a neater fit if they bulge inwards slightly at the top. A 5L is Ideal for the production of bigger shrubs with a larger root capacity, these can be seen across our nursery but generally found within our garden centre sales. Records the default button state of the corresponding category & the status of CCPA. It works only in coordination with the primary cookie.Soil Depth: When repotting allow a little room for the roots to spread. The soil should not be so shallow that without drainage the roots will sit in water, nor so deep that the water drains below the roots leaving the plant to dry out. Please note: plant heights are approximate and are provided for indicative purposes only. Plants suitable for hanging may be depicted in a hanging grow pot, the actual grow pot used to ship the plant might not include these attachments.