This can show "Crossover Settings" overlaid in the grided frequency chart along with the settings being applied via EQ. Only Bi-Amp mode offers this. The Behringer NX3000 is a receiver with a class D amplifier that offers a variety of features suitable for performance/stage purposes. With a total harmonic distortion (THD) of just 0.05%, it ensures the delivery of high-quality sound without compromising audio clarity. Only two downsides which are more of an unfortunate design choice then an actua downside, doesn't really detract from the value:

Behringer NX3000 – Thomann UK

Third-Party Software. MG-IP is not responsible in any way for the Third-Party Software or your use thereof. Term and Termination En el panel trasero también encontrará los interruptores que permiten que el amplificador NX3000 funcione en los modos de puente dual mono, estéreo o mono que elija. The quality of tactile hardware you use can greatly limit or increase not only how good the various frequencies in tactile tones or effects may feel but the range of frequencies you really can make good use of or properly enjoy.

Product Research

care to safeguard all Software (including all copies thereof) form infringement, misappropriation, theft, misuse, The amp has plenty of overhead if you're not driving the LFE's at their max and this DSP version has loads of features to make sure you can get the best sound out of your setup without fear of not having enough power or damaging your equipment. Specifically bought the DSP version as the built in filters and crossovers mean I can have the granularity I need to control the audio being pushed to the transducers, which is essential when they are being used to replicate specific effects in racing or flying simulators.

Behringer NX3000 (English - 23 pages) User manual Behringer NX3000 (English - 23 pages)

For general tuning, I recommend testing with "Audio Tactile" source and using test-tone generators or tone generation based software options. Do tests to determine how your own tactile feels with frequencies from 5Hz- over 100Hz. When you gain more understanding of how different frequencies feel. You will then discover what Hz range best suits your own hardware. Also your installation, if certain Hz are causing issues with materials like reverb/pinging or bad vibration noises etc. The Behringer NX3000 is designed to be reliable and durable, with premium materials used in its construction. It has an AC (power) input, making it easy to connect to a power source for use. El amplificador de potencia NX3000 incluye 3000 vatios (2 x 1500 vatios a 2 ohmios, 2 x 900 vatios a 4 ohmios y 3000 vatios en modo puente de 4 ohmios) en paquetes excepcionalmente livianos (7,7 lbs / 3,5 kg) y montables en bastidor. Alternatively, they may want to let the amp output its max potential wattage for the suitable Ohm required. Manufactured with attention to detail and premium materials, this receiver is designed to withstand the rigors of live performances and deliver consistent audio performance over time.

In terms of power, this receiver boasts a peak power per channel of 1500W, providing a robust audio output. Additionally, the RMS power output per channel at 4 Ohms is 900W, allowing for consistent and reliable performance. It is clear that some transducers/shaker units have peak outputs at different frequencies. This can be @ 35Hz or under as well as some that peak @40-50hz or have a peak output with 60-80Hz. Just keep in mind that sometimes a good tune, is reducing some frequencies to help level up others. It is not always about boosting frequencies that are already strong to make them stronger. We use this to digitally limit the max wattage output, this will vary based on the "Load" selected and adjusting the "Peak Limiter" For example, a User may want to limit a channel to (4ohm 50watts) to ensure it does not get damaged by higher wattage. Okay so lets begin, first here is a useful link to help understand some terms that will be shown and used. If in Stereo mode keep in mind you need to apply settings in both channel A/B. When the amp is in Dual Mono then the EQ is applied to both channels the same. Some users may have an amp powering different tactile. So in that case, "Stereo" operation would be best to enable individual EQ settings for the different tactile used on channel "A" and "B"