Recoating time is slightly longer than drying time. In general, allow an additional 24 hours after oil-based paint dries before recoating, and allow 4 hours after water-based paint dries before applying a second coat. Prep and Application Benjamin Moore, a leading paint company that has served homeowners for over 100 years, provides exterior paint solutions through its owned and operated brands, including INSL-X. The company’s outdoor paint catalog is designed to cover a variety of surfaces like asphalt, metal, tile, and wood so that all of your home’s outdoor areas are protected. KILZ

As this is a solvent-based solution, you’ll want to keep pets well out of the way during application.For added convenience, this product comes in a variety of opacities and can be used to cover previously painted and stained wood. Two coats of paint are ideal for uniform coverage, and one gallon covers up to 300 or 400 square feet. Even though this paint is on the pricey side, its impressive coverage area will likely save you money in the long run. When it comes to buying paint, it’s best to err on the side of caution and get more rather than not enough. Leftover paint can be used later for touchups if necessary. Still, you don’t want to end up with large cans that never get opened. Follow these steps to get an idea of how much you need. After 8 hours (the recommended minimum wait time), I applied a second coat, brushing it perpendicular to the first, as instructed on the label. I could see a potential benefit to cross-brushing the second coat—it might adhere better than if brushed in the same direction. That was the first time I’d run across the technique, but I’ll keep it in mind for future painting projects. Plus, INSL-X is made by Benjamin Moore, one of the most respected paint manufacturers in the nation, and I usually trust the company’s advice.

Stain, on the other hand, adds appeal to natural wood grain. The look achieved from stain depends on the color and opacity of the stain. The more opaque the stain, the more protection it offers. You can choose from clear, semi-transparent or solid stains. Usually, it needs to be applied every two to three years. A polyurethane sealant helps protect the finish and provides moisture resistance. Latex or Acrylic Water-Based Paint vs. Oil-Based Paint The next day, I put the painted test board outdoors to sit in the elements for 2 weeks. After that, I tested it for both scrubbability and nonslip properties. I sprayed the board with water and ran my fingers over it again—it wasn’t at all slippery. Then, I wiped the wet surface with a clean white rag to see if any color would come off on it. Nope. The rag was still white.Other common additives in paint include UV ray- and mildew-resistant additives designed to target areas that receive direct sunlight or heavy rainfall. Surface Sheen Nonslip safety is a top concern around pools, and Fixall Anti-Slip Skid Grip Coating produces a textured, high-traction flat finish on wood, stone, and concrete. Moreover, it exceeds the Americans with Disabilities Act (ADA) standards for anti-slip surfaces. This water-based paint is available in a range of attractive colors that complement landscape decor, and the coating resists fading, chipping, and peeling. Primers can take up to four hours to dry. Paint can take anywhere from four to 24 hours to dry, depending on the type of surface, the type of paint, the outdoor temperature and the humidity. Additional considerations include the type of wood, the kind of prep work required before painting, and the desired look of the finished project. Base

Anna Ryan is a writer, copywriter and editor. She has a wide range of knowledge and, because of this, has been able to contribute to a variety of different genres, including article and blog writing.The Fixall paint left a noticeably textured surface that felt slightly rough to my bare fingers when fully dry. After 2 weeks, I wet it down, and the friction was excellent! My fingers didn’t slip at all. A slight downside is that the surface is scratchy, and I imagine it could be rough on bare feet. The nonslip safety factor, however, is excellent. It also excelled in my scrubbability test.

We may earn commission from our brand partners when purchasing products through our links. Learn more. To calculate how many gallons of paint you will need, use a real tape measurer or an app built for the same purpose. The paint is also available in either gloss or low luster, and I chose low luster. I bought the paint at the local Home Depot, and they shook it in their machine. It was blended well when I opened it, and no stirring was necessary. I applied a uniform coat to my test board with a brush, and it covered evenly. The brush marks leveled out to a flat finish, but I felt like a single coat was too thin. After 72 hours, I applied a second coat, even though the label’s instructions didn’t suggest it. It also didn’t mention a minimum recoat time. However, at 72 hours, the paint was supposed to be fully cured, so that’s when I applied a second coat.Fixall paint offers superior adhesion and can be applied with either a brush or a roller. Cleanup is simple with warm, soapy water. One gallon covers up to 80 square feet. Roller: The best tool for applying new paint is a paint roller. A roller speeds the painting process, and it delivers a uniform coat of paint. The roller handle connects to an extension pole, making it easy to paint while standing up. Selecting the appropriate paint is key for an impeccable finish and enduring protection. In DIY home projects, having the right knowledge can make all the difference. Does Fence Paint Work on Concrete? Pay careful attention to the instructions and read the specifications on the paint to estimate drying time. Durability