The fast drying formula is easy to use so that you can transform you car’s exterior at home, creating a durable finish with shine that will last. Join our free Finishing Academy and enjoy over 3 hours of tutorial videos on our recommended methods of applying our products. We strongly advise against deliveries to be made to hotels, workplaces or multiple occupancy premises. High Gloss Cellulose Clear Lacquer is ideally suited for use over most basecoat and other similar paint systems where localised and spot repair is necessary.

Our Professional Clear Gloss Lacquer is designed to transform any surface into a showroom quality display. Tip: We recommend adding 4-5 coats of clear gloss over the top of all colours for protection and a deeper glossy shine. Simoniz Clear Acrylic Lacquer is part of our paint and maintenance range, developed to help you with the bigger jobs at home. Acrylic Gloss Lacquer is touch dry and tack free in around five minutes and hard dry in twenty minutes, ready for a second coat if needed after a light rubdown with a fine abrasive.Traditional Paint High-Gloss meets the highest requirements with regard to the environment, durability and ease of use. This is the same type of lacquer as used on vintage Fender and Gibson guitars which, over time, will produce an aged, tarnished look to your instrument. Apply this PlastiKote Quick Dry Clear Lacquer spray to surfaces for increased protection and scratch resistance. Use for finishing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough lacquer finish. The drying time is slightly longer than that of the melamine lacquer spray, but it’s still only around 20 minutes.

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. A high-gloss lacquer is often used outside, but indoors this lacquer will provide the classy style you are looking for as well. Best used over a Cellulose Sanding Sealer (brushing or aerosol) and can be overcoated with a wax for a softer tactile feel. For best results let the surface fully dry, then lightly sand and re-coat; once you have achieved a good even finish, Nyweb pads can be used and then followed by burnishing cream to give your work the finish it deserves.

These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.

Since these providers may collect personal data like your IP address we allow you to block them here. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible. Warm up the can, give it a good shake, light must on first coat, slightly heavier and even coats thereafter. Low build, quick drying, nitrocellulose lacquer for adjusting sheen level and sealing colour touch-up work with minimal lacquer build-up around repair. Use it over Chalk Paint™ for a robust finish that will withstand general wear and tear – perfect for dining room tables, outdoor furniture, floors and skirting boards.

Our Professional Clear Satin Lacquer is the perfect choice for those looking for a silky finish for their woodturning pieces.