in- 1 multi-function drill guide , for drilling dowel holes and vertical holes. Adjustable metal bushings accurate alignment when drilling hole, easy to adjusting drilling height and hole depth. Never used a jig apart from lining up the hole in the end of the board and that was a simple piece of wood with two dowels and a hole the same size as the drill bit. Finally I drilled the hole in the side for the cam nut. Here I used the 5/8" Forstner bit. This hole is the most critical of the three. The center positioning needs to be pretty precise for the cam to engage properly. Its center is the same as the one on the edge and it's 1-5/16" from the edge. This puts the edge of the hole right underneath the top of the post. If it's too far from the edge, the cam won't engage and if it's too close to the edge the cam won't tighten against the wood. I'm pretty pleased with the way this worked. It took a bit to drill all the holes but it provides a nice clean joint that's secure and easy to take apart for storage or moving. The hole for the cross dowel can be stopped, hiding the cross dowel on the outside of the project, or drill a hole all the way through and use the cross dowel as an accent. We manufacture a line of bright-finished stainless steel cross dowels to add some style to your project. As you can tell, the design possibilities are limited only by your imagination.

Jig Kit Cam Lock Jig Classic Doweling Jig Levoite Doweling Jig Kit Cam Lock Jig Classic Doweling Jig

Where can I buy a metal jig that will accuratley drill these holes? If anyone has a better way I would appreciate some help. (and please go easy on me, more help than criticism!!!) Use the 3/16" bit to drill holes for the posts to screw into. The depth isn't terribly important as long as it's deep enough for the post to screw in securely up to the shoulder of the thread. I found 7/16" deep worked well. I'd recommend getting two pieces of scrap material to practice on. Once you've done it a time or two, it's easier to proceed with confidence on the main project pieces.Should probably start by assembling one frame, putting on a door, and sliding it against the wall to see how it works. All my bits are in imperial measurements, but the tolerances are close enough they worked just fine in spite of the metric hardware. I used a drill press for all my holes to help ensure straight holes and a good fit. If you don't use a drill press, do your best to get the holes as straight as possible. Made of aluminum alloy 6061, practical, easy to operate and use, wide application range, has a long service life. Make strong hidden joints, fast and easily produced. Perfect joints, no need to pre-drill mating workpiece.Multi-ourpose drill guide , for drilling dowel holes and vertical holes.Dowelling Jig for Furniture Fast Connecting Cam Fitting Drilling Locator. Aluminum Alloy Doweling Jig：Be made of 6061 aluminum alloy,anodizing surface treatment,laser engraving scale I can make a jig using MDF to drill the location holes…but I am worried about the accuracy. If the holes are not exactly co ordinated then the cam will either not sit flush or it will not locate onto the steel insert.

Jig Dowel Cam Jig Minifix Jig Kit Universal High Precision Jig Dowel Cam Jig Minifix Jig Kit

The home center had two types of posts: one had wood screw threads and the other had machine screw threads. I used the ones designed for wood. Both thread types came in only one size and it seemed about the same as all the other's I've seen in furniture kits. I don't know if the connectors come in different sizes or if there's pretty much only one standard. In any case, the bags for the ones I had were marked with "M6 x 45.5" for the connector bolts and "15mm x 16mm" for the cam connector. The details I present here are for these sizes. in- 1 multi-function drill guide for drilling dowel holes and vertical holes.Dowel drill guide tools for the fixation and centering while drilling and woodworking. Adjustable metal bushings accurate alignment when drilling hole, easy to adjusting drilling height and hole depth. Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.Apart from very experienced cabinet makers nobody will get that fine a tolerance when but joining materials